000002234 001__ 2234
000002234 005__ 20141118153437.0
000002234 04107 $$acze
000002234 046__ $$k2013-09-11
000002234 100__ $$aBouichou, M.
000002234 24500 $$aHow to identify a natural cement case study of the Vassy

000002234 24630 $$n3.$$pProceedings of the 3rd Historic Mortars Conference HMC13
000002234 260__ $$bGlasgow : University of the West of Scotland, 2013
000002234 506__ $$arestricted
000002234 520__ $$2eng$$aNatural or Roman cements were the first modern cements to be industrially produced at the beginning of the 19th century in Europe. Used equally by engineers for their hydraulic properties, and by architects for their aesthetic qualities, they were massively employed for façade decoration or as cast-stone elements for masonries. This cultural heritage, even if it is abundant, is relatively unknown and needs now to be clearly identified and restored. Because of lack of knowledge and data on these cements, they are often identified as Portland cement or hydraulic lime, or hydraulic lime mixed with gypsum or Portland cement. Furthermore, heterogeneous calcination and varied quarried stone, which strongly modify their properties, make their characterizations more difficult. This paper presents a case study of the Vassy Church, with a focus on the binder identification of mortars. The Vassy church, built in 1859 by Gariel, a Vassy cement producer, is located in Burgundy, France. On the church, ochre-coloured mortars, were used either indoors, outdoors, as renders, as pointing mortars, as “run in situ” mortars, applied on stone or brick. Different types of mixes were employed, from rich to poor mortars. The testing protocol of those analysis firstly consisted in clinker grains analysis on polished sections (with and without Borax etching) by optical (OM) and scanning electron microscopy (SEM) observations, coupled with EDS analysis. Secondly, hydrated phases were characterised on mortar fractures, through SEM observations coupled with EDS analysis. Finally, crystallised phases were identified by XRD analysis of binding powder samples. Results of these analysis show several clinker morphologies and compositions, and different types of hydrates phases, according to the carbonation state. These results show important differences in terms of microstructure between natural cements and the other common binders like Portland cement or lime.

000002234 540__ $$aText je chráněný podle autorského zákona č. 121/2000 Sb.
000002234 653__ $$anatural cements, clinkers, ettringite, vaterite.

000002234 7112_ $$a3rd Historic Mortars Conference$$cGlasgow, Scotland (UK)$$d2013-09-11 / 2013-09-14$$gHMC13
000002234 720__ $$aBouichou, M.$$iBlondiaux, T.$$iTexier, A.$$iMarie-Victoire, E.
000002234 8560_ $$ffischerc@itam.cas.cz
000002234 8564_ $$s957810$$uhttp://invenio.itam.cas.cz/record/2234/files/Bouichou - How to identify a natural cement case study of the Vassy.pdf$$y
             Original version of the author's contribution as presented on CD, .
            
000002234 962__ $$r2223
000002234 980__ $$aPAPER