000022411 001__ 22411
000022411 005__ 20170622150012.0
000022411 04107 $$aeng
000022411 046__ $$k2015-05-25
000022411 100__ $$aBergami, Alessandro Vittorio
000022411 24500 $$aCYCLIC BEHAVIOR OF MASONRY IN FILLED R.C. FRAMES: GLOBAL MODELING OF MASONRY

000022411 24630 $$n5.$$pComputational Methods in Structural Dynamics and Earhquake Engineering
000022411 260__ $$bNational Technical University of Athens, 2015
000022411 506__ $$arestricted
000022411 520__ $$2eng$$aThe effects of infill panels on the response of r.c. frames subjected to seismic action are widely recognized. Numerous experimental investigations were effected and several analytical models were developed on this subject. This work, which is part of a larger project dealing with specific materials and structures commonly used in Italy, discusses experimental tests on masonry and samples of bare and infilled portals. The experimental activity includes tests on elemental materials, and 12 wall samples. Finally, three one-bay one-story reinforced concrete frames, designed according to the outdated Italian technical code D.M. 1996 without seismic details, were tested (bare and infilled) under constant vertical and cyclic lateral load. The first cracks observed on the framed walls occurred at a drift of about 0.3%, reaching its maximum capacity at a drift of 0.5% while retaining its capacity up to a drift of 0.6%. Infill contributed to both the stiffness and strength of the bare reinforced concrete frame at small drifts thus improving overall system behavior. In addition to the experimental activities, previously mentioned, the recalibration of a model proposed by Comberscue (1996) was evaluated. The accuracy of an OpenSees non linear fiber based model of the prototype tested, including a strut element was verified through a comparison with the final experimental results. This work has been partially supported by research grant DPC-ReLUIS 2014.

000022411 540__ $$aText je chráněný podle autorského zákona č. 121/2000 Sb.
000022411 653__ $$a

000022411 7112_ $$aCOMPDYN 2015 - 5th International Thematic Conference$$cCrete (GR)$$d2015-05-25 / 2015-05-27$$gCOMPDYN2015
000022411 720__ $$aBergami, Alessandro Vittorio$$iNuti, Camillo
000022411 8560_ $$ffischerc@itam.cas.cz
000022411 8564_ $$s19607$$uhttp://invenio.itam.cas.cz/record/22411/files/C756_abstract.pdf$$yOriginal version of the author's contribution as presented on CD, section: 
.
000022411 962__ $$r22030
000022411 980__ $$aPAPER