1.
|
In mining regions a great hazard for masonry and concrete residential buildings are semiseismic earth tremors, which potential energy could achieved 1010 [J]. Only non-cr [...]
|
2.
|
Mortars from two medieval bridges (Charles Bridge in Prague and bridge in Roudnice) and two Roman bridges (Ponte di Augusto in Narni and bridge in Sardinia) were analyzed [...]
|
3.
|
In restoration or repair of old buildings the correct estimation of the stress-strain-relationship of the existing structure is an important task. Masonry stiffness is cr [...]
|
4.
|
Linseed oil was one of the most common natural organic additives used in ancient times. Nevertheless the mechanism and the technology, e.g. effects of different dosages, [...]
|
5.
|
The development of strength in conservation mortars is of particular significance for new synthesized lime-based mixtures, in terms of practical application, performance [...]
|
6.
|
Instable behaviour both of the road and tram bridge at the Prague “Chotkova road” up to Klárov and the rock mass around has been monitored long time yet. The movemen [...]
|
7.
|
Stodola, J.
Monitoring of technical condition of machines (e.g. engines) based on used oil analysis is an urgent practice to optimize control and maintenance. Both perfect wear produ [...]
|
8.
|
Abstrakt: This contribution deals with the functional description and initial setting of the Reactor Vibration Monitoring System (RVMS) that is supplied as a part of the [...]
|
9.
|
The paper deals with the modelling of balancing machine vibration and the identification of the stiffness and damping coefficients of oil-film bearings. The real balancin [...]
|
10.
|
In this paper transfer of vibration from motor to the bottom group of rotary drier is analyzed in the ADAMS/Vibration module environment. Excitation from unbalanced motor [...]
|
11.
|
The paper deals with an application of drilling method in order to determine the residual stresses in big forgings for turbine rotors and railway axles. Residual stress w [...]
|
12.
|
Švancara, Pavel
Abstrakt: Correct determination of individual SEA parameters is necessary to build a reliable SEA model. Especially for subsystems with complex geometry and material may [...]
|
13.
|
Puklický, L.
Steel-concrete composite columns are extensively used in modern buildings. Steel being of high tensile strength presents a high quality building material, concrete on the [...]
|
14.
|
Linseed oil was commonly used in ancient times as a protective treatment for building materials due to its ability to grant hydrophobic properties. It is an environmental [...]
|
15.
|
Since ancient times organic additives such as milk, curd, whey, blood, oils, fruit juices, etc. have been added to mortars. The majority of technological procedures were [...]
|
16.
|
The subject of the paper is the probabilistic safety assessment of an unbraced steel frame containing leaning columns and exposed to several variable loads. Reliability a [...]
|
17.
|
Changes of mechanical properties, namely of modulus of elasticity, often play a role of damage accumulation indicators in the framework of fatigue behaviour of composite [...]
|
18.
|
In this paper the authors propose a new procedure for the normalization of the free vibration mode shapes of a linear structure subject to seismic load. The normalization [...]
|
19.
|
Frequency modal and damping characteristics of an aeroelastic model designed for experiments in the wind tunnel are studied. Based on the experimental modal analysis the [...]
|
20.
|
Ductile fracture criteria are used for fracture prediction in metal forming processes. In this paper, there is briefly described the method of criteria verification and t [...]
|
21.
|
Hole drilling method is a total numerical simulation of tension or bending loading of two types of beam specimens. The FEM model of the special drilling strain gauge rose [...]
|
22.
|
This paper is concerned with mathematical modeling of the imperfect bladed disk with friction elements, which are used to suppress blade vibration. These kinds of systems [...]
|
23.
|
Vítek, K.
The idea of the presented numerical simulation technique corresponds to the E 837 standard concepts but is more universal. It transforms the strains, arising during the h [...]
|
24.
|
Naď, M.
The existence of a crack in a structural member introduces local modification of flexibility and consequently affects the dynamic behaviour of the cracked member. In this [...]
|
25.
|
Král, J.
A long-term measurement of the wind response of the first building started in 2007and of the second building in 2009. The response monitoring is automatic and continues. [...]
|
26.
|
Omishore, A.
The verification of the design reliability of a steel element according to the concepts of standards EUROCODE 3 and EN1990 is presented in the article. Reliability analys [...]
|
27.
|
The paper is focused on analysis of changes of eigenfrequencies due to local damage in beam buckling problem. The aim is determination of suitable initial parameters for [...]
|
28.
|
The application of the drilling test on the characterisation of homogeneous stones is widely used, mainly on carbonate stones that are softer. The drilling revolution and [...]
|
29.
|
The paper is focused on damage identification of dynamically loaded structures using methods of soft computing including artificial intelligence. The damage and variabili [...]
|
30.
|
The endeavour to use the changes of dynamic characteristics for the determination of damage or other imperfections of structures is not new. The rudimentary application o [...]
|