1.
|
The point of contribution consists in the analysis of linear and nonlinear damping influence on the dynamic properties of the specific case of pseudoplanetary system with [...]
|
2.
|
Pečínka, L.
Analysis of the dynamic response of the beam under moving load and axial periodic force and with constant damping result in well known solution of Mathieu equation. In fa [...]
|
3.
|
Knowledge of the physical properties of materials is basis for design and mathematical modeling of complex systems, where the materials are used. Frictional properties of [...]
|
4.
|
To provide passive heat storage in buildings, materials exhibiting a phase-change within building operating temperature can be incorporated into the envelope material. Th [...]
|
5.
|
The treatment of rising damp in historic building walls is very complex due to the thickness and heterogeneity of the walls. Some techniques, such as watertight barriers, [...]
|
6.
|
Abstrakt: The dimensioning of the metal-diaphragm depends on the maximum measured pressure and on necessary preload. Classic methods of elasticity were used to get some p [...]
|
7.
|
The calibration of the potential method DC/PD is calculated for the side-grooved CT-sample with point current inputs. The grooves are modelled by a line transition resist [...]
|
8.
|
The paper presents the latest results of modeling of the erosion effects of cavitation bubbles on the blades of a water pump. Cavitation erosion is caused by the collapse [...]
|
9.
|
This paper presents a simulation of 3D curved crack propagation in a steam turbine blade lock. These fatigue cracks are often initiated near a blade root contact zone. Tw [...]
|
10.
|
Podešva, J.
The modeling of the mechanical structures with large number of degrees of freedom (DOF) was in the past the problem of the machine time and disk space. On the today’s h [...]
|
11.
|
A stage with impulse blading on a drum rotor is considered. Steam leakage through the shroud and shaft sealing has been determined by means of a numerical simulation. The [...]
|
12.
|
One of the unwanted effects during braking is non-uniform heating of the brake disks and formation of hot spots. In the present contribution, an extension of Lee and Barb [...]
|
13.
| |
14.
|
The paper describes a modelling technique of tool rest of modern machining centre with focus at damping of dovetail groove slideway. Damping of tool rest structure strong [...]
|
15.
|
The paper deals with cooling of grooved roll. The aim is to find optimal spray parameters, specify nozzle type, geometrical configuration and feeding pressure to elongate [...]
|
16.
|
This paper deals with the methodology of the modelling of rotating shafts with flexible disks. Rotating shafts are modelled as one dimensional continuum on the basis of [...]
|
17.
|
Abstrakt: The impact motion of rigid rotor supported on passive magnetic bearings is studied. Impacts on passive magnetic bearings are investigated. Impacts occur in reta [...]
|
18.
|
Presented paper deals with computational fatigue strength prediction of high pressure level steam turbine blade pin joints. Quazi-static FE analysis of one turbine disk s [...]
|
19.
| |
20.
| |
21.
| |
22.
| |
23.
|
Flexural vibrations of rotating disk contain forward and backward traveling waves can be excited at certain speed of rotating disk also by a standing constant single poin [...]
|
24.
|
The paper presents the modal synthesis method for a mathematical modelling of rotating bladed disk vibration. The standard finite element software does not allow to cons [...]
|
25.
|
This paper is concerned with mathematical modeling of the imperfect bladed disk with friction elements, which are used to suppress blade vibration. These kinds of systems [...]
|
26.
|
This paper is concentrated on modelling of friction effects in bladed disk of steam turbine, which are realized by means of friction elements placed between blades shroud [...]
|
27.
|
This paper is aimed at reducing vibrations of bladed disk in particular operating state. The damping element used in this contribution is realized by a strap with isoscel [...]
|