000010933 001__ 10933
000010933 005__ 20141205155818.0
000010933 04107 $$aeng
000010933 046__ $$k2008-10-12
000010933 100__ $$aMcCormick, Jason P.
000010933 24500 $$aCharacterization and Optimization of Shape Memory Alloy Behavior for Seismic Vibration Control Applications in Buildings

000010933 24630 $$n14.$$pProceedings of the 14th World Conference on Earthquake Engineering
000010933 260__ $$b
000010933 506__ $$arestricted
000010933 520__ $$2eng$$aOne means of developing self-centering structural systems for seismic applications is through the use of materials with inherent recentering capability. Superelastic NiTi shape memory alloys are one such metallic alloy which can undergo large deformations while returning to its original shape upon unloading. To explore their feasibility for structural applications, tension-only, quasi-static cyclic tests to a constant strain level and dynamic cyclic tests with non-uniform strain cycles were preformed on large diameter NiTi bars. Unlike past studies, hot-rolled, rather than cold formed, large diameter bars were considered as a more cost effective alternative. The results showed that residual strain levels remained below 1% even after 20 cycles at 6% strain. However, equivalent viscous damping values also remained below 4%. Dynamic loading rates caused an approximate 5°C increase in the surface temperature of the bars resulting in a further decrease in the damping capacity, but no significant effect on the residual deformation values were observed. To further optimize the cyclic properties of NiTi shape memory alloys, a mechanical training study of NiTi wire specimens was also undertaken. Mechanically training the wire specimens for 40 cycles to 6-7% strain stabilized the properties in terms of the forward transformation stress, residual strain, and equivalent viscous damping. In general, the results of this study suggest that large diameter NiTi superelastic shape memory alloys are a viable material for the development of self-centering structural systems for earthquake mitigation applications.

000010933 540__ $$aText je chráněný podle autorského zákona č. 121/2000 Sb.
000010933 653__ $$ashape memory alloys, self-centering, residual strain, mechanical training, damping

000010933 7112_ $$a14th World Conference on Earthquake Engineering$$cBejing (CN)$$d2008-10-12 / 2008-10-17$$gWCEE15
000010933 720__ $$aMcCormick, Jason P.$$iDesRoches, Reginald
000010933 8560_ $$ffischerc@itam.cas.cz
000010933 8564_ $$s569523$$uhttps://invenio.itam.cas.cz/record/10933/files/11-0096.pdf$$yOriginal version of the author's contribution as presented on CD, Paper ID: 11-0096.
000010933 962__ $$r9324
000010933 980__ $$aPAPER