000011520 001__ 11520
000011520 005__ 20141205155919.0
000011520 04107 $$aeng
000011520 046__ $$k2008-10-12
000011520 100__ $$aSakata, H.
000011520 24500 $$aStudy on Mechanical Behavior of Hybrid Member Composed of Cedar-Glulam Timber and Steel Plate with Friction Connector

000011520 24630 $$n14.$$pProceedings of the 14th World Conference on Earthquake Engineering
000011520 260__ $$b
000011520 506__ $$arestricted
000011520 520__ $$2eng$$aA hybrid member composed of a thin steel plate sandwiched between two glued-laminated cedar timber members has been developed and studied. The steel and timber parts were connected with shear-ring connectors and bolts. When using the shear-ring connector, the initial clearance between the shear-ring and the glulam timber needs to be wider to enable the hybrid member to be built up. Thus, the connectors were improved by introducing a friction joint. In this study, shear tests were conducted on the friction connectors, and axial compression tests were conducted on the hybrid members to determine the compression characteristics, and new estimation equations were proposed. The stiffness of hybrid members with friction connectors was higher than that of members with shear-ring connectors, and the former could be easily built up. The characteristics of these members were determined by shear tests and axial compression tests. It was thus possible to predict their axial compressive strength with sufficient accuracy by evaluating the shear strength and the shear stiffness of the connector by appropriately considering the connectors’ characteristics.

000011520 540__ $$aText je chráněný podle autorského zákona č. 121/2000 Sb.
000011520 653__ $$aFriction Connector, Hybrid Member, Alignment of Connector, Shear Stiffness of Connector, Estimation of Axial Strength

000011520 7112_ $$a14th World Conference on Earthquake Engineering$$cBejing (CN)$$d2008-10-12 / 2008-10-17$$gWCEE15
000011520 720__ $$aSakata, H.$$iJokaku, M.$$iNakano, S.$$iTomimoto, A.$$iNakamura, Y.
000011520 8560_ $$ffischerc@itam.cas.cz
000011520 8564_ $$s674207$$uhttps://invenio.itam.cas.cz/record/11520/files/05-04-0064.pdf$$yOriginal version of the author's contribution as presented on CD, Paper ID: 05-04-0064.
000011520 962__ $$r9324
000011520 980__ $$aPAPER