The Book of Extended Abstracts contains 76 two-page abstracts presented at the 32nd conference Computational Mechanics 2016 , which was held at the Hotel Horizont in Špičák, Czech Republic, on October 31 - November 2, 2016. This annual conference, which was attended by nearly one hundred participants from the Czech Republic, Slovakia and from abroad, was organised by the Department of Mechanics, Faculty of Applied Sciences of the University of West Bohemia under the auspices of • Miroslav Lávička, the Dean of the Faculty of Applied Sciences, • Jiří Struček, the Vice-President of the Pilsen Region for Education, Sport, Culture and Tourism, • Czech Society for Mechanics, • Czech National Committee of IFToMM, • Central European Association for Computational Mechanics. The main objective of this traditional conference is to bring together academicians, researchers and industrial partners interested in relevant disciplines of mechanics including • solid mechanics, • fluid mechanics and fluid-structure interaction, • mechatronics and vibrations, • thermodynamics, • fracture mechanics, • heterogeneous media and multiscale problems, • dynamics of mechanical systems, • reliability and durability of structures, • mechanics in civil engineering, • biomechanics, • experimental methods in mechanics, to create an opportunity for meeting, discussion and collaboration among the participants.
solid mechanics; fluid mechanics; fluid-structure interaction; mechatronics and vibrations; thermodynamics; fracture mechanics; heterogeneous media and multiscale problems; dynamics of mechanical systems; reliability and durability of structures; mechanics in civil engineering; biomechanics; experimental methods in mechanics
Contributors:
Publisher:
University of West Bohemia, Univerzitní 8, 306 14 Plzeň, Czech Republic
ISBN:
978-80-261-0647-0
Conference Title:
32nd conference COMPUTATIONAL MECHANICS 2016 and the workshop Modelling and Inverse Problems for Heterogeneous Media
Conference Venue:
Špičák (CZ)
Conference Dates:
31/10/2016 / 02/11/2016
Rights:
Text je chráněný podle autorského zákona č. 121/2000 Sb. Licence Creative Commons Uveďte autora-Neužívejte dílo komerčně-Zachovejte licenci 3.0 Česko
Aerodynamic design of the propeller for low-speed indoor UAV
by Klesa, J. |
Analysis of stress concentration near graphite particles in globular graphite cast iron
by Vaško, M. |
Approaches to the computational modelling of the mechanical systems with cables
by Polach, P. |
Assessment of flutter origin in simplified blade cascade with prescribed harmonic motion
by Bublík, O. |
CFD method of prediction of turbine blade flutter
by Klečková, J. |
Calculation of locomotive traction force in transient rolling contact
by Voltr, P. |
Calculation of the sound power in the inlet of the aero-engine based on the analytical prediction
by Bartošák, M. |
Comparison of local and global critical time step size estimators in explicit dynamics
by Mračko, M. |
Computational aspects of RBFN meta-models for reliability problems
by Lepš, M. |
Computational simulation of additional effects in the sealing gap
by Nováková, N. |
Contribution to the analysis of higher dimensional dynamical systems
by Rosenberg, J. |
Control synthesis of a planar multi-level manipulator
by Beneš, P. |
Creep-fatigue behaviour of steel P 91
by Janoušek, J. |
Damage prediction with coupled fatigue and creep mechanism applied on generator turbine
by Had, J. |
Design of open combustion chamber for LIF measurements
by Kouba, J. |
Determination of velocity of propagation of Lamb waves in aluminium plate using piezoelectric transducers
by Lášová, Z. |
Dimensioning of the take-up bar on a weaving loom using Winkler’s model of soil
by Žák, J. |
Dynamic properties of a turbine blade couple: Analysis of the contact force effects
by Brůha, J. |
Dynamics of a parallel multilevel mechanism
by Hajžman, M. |
Effect of a soft tissue on vocal tract acoustic resonance properties in vocal exercises using phonation into tubes
by Radolf, V. |
Eigenfrequency analysis of nuclear reactor with clearances in couplings
by Zeman, V. |
Experimental analysis of railway vehicle passing over turnout frog
by Hába, A. |
Experimental analysis of steering shaft with focus on the strength of the bonded joint
by Padovec, Z. |
Experimental investigation of phonation using artificial models of human vocal folds and vocal tract
by Horáček J, . |
Experimental redundantly actuated cable-driven manipulator
by Kraus, K. |
FE modelling of the influence of the lamina propria properties on the vocal folds vibration and produced sound for specific Czech vowels
by Hájek, P. |
Finite element analysis of supracondylar periprosthetic femoral fracture treatment
by Jansová, M. |
Frame elements with embedded discontinuities for modelling hinges in reinforced concrete prismatic elements
by Juárez-Luna, G. |
Free vibration modal spectrum of planetary gearing box
by Půst, L. |
Friction and fretting wear coefficients between the key and the groove in the lower part of the WWER 440-213 reactor pressure vessel
by Pečínka, L. |
Hierarchical numerical modelling of porous media in SfePy
by Cimrman, R. |
Influence of geometric configuration of the acoustic-structural system on deformation characteristics
by Štorkán, J. |
Influence of random factors on pipeline systems
by Valkovič, V. |
Influence of the velopharyngeal opening on human voice quality
by Vampola, T. |
Interaction of the rigid journal with incompressible fluid
by Havlášek, M. |
Investigation of aeroelastic bridge instabilities using the multidimensional FokkerPlanck equation and wind-tunnel experiment
by Král, R. |
Measurement of the end point by laser tracker which is mounted on a slide
by Kovář, F. |
Microscopic structural analysis of biological tissues and biomaterials
by Tonar, Z. |
Modeling of drive of cable driven mechanism
by Zavřel, J. |
Modelling of wave propagation in phononic plates in frequency and time domain
by Rohan, E. |
Modelling vibration sources of rotating device using MSC.ADAMS
by Sapietová, A. |
Multiscale modeling of ionic transport in deformable porous media
by Turjanícová, J. |
Non-uniform torsion modal analysis of thin-walled open cross-sections with effect of axial force
by Murín J, . |
Numerical analysis of a pedestrian to car collision: Effect of variations in walk
by Špička, J. |
Numerical and experimental study of induction bending of large diameter pipes
by Sága, M. |
Numerical simulation of a human body in aircraft crash scenarios
by Lindstedt, L. |
Numerical simulation of free surface flows using a three-equation model for two-phase flows
by Plánička, S. |
Numerical simulations of flow induced vocal folds vibrations
by Sváček, P. |
Numerical solution of 3D flow through turbine cascade using modified EARSM model
by Holman, J. |
On stability of 2D flow-field
by Uruba, V. |
On the application of LU-SGS scheme for turbomachinery flows
by Fürst, J. |
Parametric CFD analyses of coolant flow in nuclear reactor VVER 440
by Kutíš, V. |
Planar mechatronic structures with distributed collocated actuators and sensors
by Šika, Z. |
Search algorithm for centerlines inside complex branched channels
by Hynek, P. |
Semi-automatic finite element mesh generation using medical imaging data
by Lukeš, V. |
Simple parallel implementation of an implicit CFD solver using the Schwarz domain decomposition method
by Pecka, A. |
Simulation model of seat with implemented pneumatic spring with consideration of variable pressure in air reservoir
by Tran Xuan, T. |
Simulations of terminal ballistics phenomena
by Špirk, S. |
Single core model in VPS with respect to non-linear static, crashworthiness and internal acoustic
by Pašek, M. |
Some results of simulations of flows with internal permeable walls
by Louda, P. |
Statics and dynamics of cable structures
by Dupal, J. |
Stress distribution in pelvic floor structures depending on real fetus head molding and trajectory during vaginal delivery
by Havelková, L. |
Stress – strain analysis of cranial implant
by Chámřád J, . |
Structural dynamic modification of the vibrating beam structures
by Naď |
Subcritical micro-crack growth in particulate ceramic composite with residual stresses
by Náhlík, L. |
Surface sensitivities computation for turbine blades using OpenFOAM
by Moravcová, F. |
The flow field and the pressure drop in multiple stenoses
by Kašpárek, M. |
The influence of residual stress on fracture behavior of the CRB test specimen
by Poduška, J. |
The influence of the slenderness ratio of the composite beam on its bending stiffness
by Zavřelová, T. |
The use of the Chebyshev interpolation in elastodynamic problems
by Hora, P. |
Validation tests for gravity casting simulations
by Lobovský, L. |
Vibration analysis of visco-elastically coupled beams
by Hračov, Š. |
Vibration of turbine rotors considering foundation excitation
by Červená, O. |
Wang tiles with adaptive edges in material engineering
by Šedlbauer, D. |
Whirl flutter optimisation-based solution of twin turboprop aircraft using full-span model
by Čečrdle, J. |
Yaw dampers in construction of rail vehicles
by Kohout, M. |