000003540 001__ 3540
000003540 005__ 20141118153356.0
000003540 04107 $$acze
000003540 046__ $$k2006-05-15
000003540 100__ $$aNovotný, L.
000003540 24500 $$aIssues at tool clamping systems

000003540 24630 $$n12.$$pENGINEERING MECHANICS 2006
000003540 260__ $$bInstitute of Theoretical and Applied Mechanics, AS CR, v.v.i., Prague
000003540 506__ $$arestricted
000003540 520__ $$2eng$$aVarious types of tooling clamping systems are used at design of machine tools. The typical representatives of clamping systems are CAPTO, ISO, UTS, HSK and other ones. Their design type execution, clamping principles and tool centring are different ones. Disadvantages can be seen most of all only during the machine operation. It can happen under usual operation conditions, but even more often under specific operation conditions, that e. g. the tool can be removed from the machine tool spindle only with big difficulties. This matter can be prevented by modification of operation conditions, by modification of applied design type execution at machine spindles, by adaptation of the tool part being clamped, etc. Whether the proposed modifications and adaptations are useful and which contribution they bring, this can be best evaluated on the basis of the problem analysis, using the technical calculations and tests. Properties and behaviors of the mechanical system, i. e. of the tool clamping device can be manifested by calculation modelling. This contribution describes numerical analysis of the ISO tool shank in the machine tool spindle without load and under operation load.

000003540 540__ $$aText je chráněný podle autorského zákona č. 121/2000 Sb.
000003540 653__ $$a

000003540 7112_ $$aENGINEERING MECHANICS 2006$$cSvratka (CZ)$$d2006-05-15 / 2006-05-18$$gEM2006
000003540 720__ $$aNovotný, L.$$iMarek, J.
000003540 8560_ $$ffischerc@itam.cas.cz
000003540 8564_ $$s892048$$uhttps://invenio.itam.cas.cz/record/3540/files/Novotny-171-PT.pdf$$y
             Original version of the author's contribution as presented on CD, , paper No. 171.
            
000003540 962__ $$r3410
000003540 980__ $$aPAPER