Contributors:
Publisher:
Institute of Thermomechanics, Academy of Sciences of the Czech Republic
Citations:
Engineering Mechanics 2001, Alena Poživilová and Jan Masák (eds), IT AS CR, Prague, 2001
ISSN:
1805-8248
ISBN:
80–85918–64–1
Conference Title:
Engineering Mechanics 2001
Conference Venue:
Svratka (CZ)
Conference Dates:
2001-05-14 / 2001-05-17
| A influence of out-of-phase combined loading by Svoboda, J. |
| A procedure for flow cross-sections calculation in ejector and its pipe system by Konečný, V. |
| A simple simulation model of an injection engine for electric aggregates by Kalous, J. |
| ARMA Model as Seismic Excitation by Fischer, C. |
| Aeroelastic instability of a system with nonconservative and gyroscopic forces by Náprstek, J. |
| An analysis of vehicle handling by using computer model by Porteš, P. |
| Analysis of behaviour ski for skiing along grass area by Vlach, R. |
| Analysis of bone conducted acoustic energy by the human crania by Přikryl, K. |
| Analysis of mechanical characteristics of prosthesis with respect to clinical experiences by Hudec, J. |
| Analysis of random vibration of the two-wheel trailer by Steinhübl, J. |
| Analysis of reasons for RC hall roof truss breakdown by Makovička, D. |
| Analysis of restitution processes of cardiac cells on changes of gating parameters by Šlichta, J. |
| Application of expert systems ANSYS and ADAMS in optimization of mechanisms with elastic members by Potěšil, A. |
| Application of expert systems ansys and adams in optimisation of mechanisms with elastic members by Potěšil, A. |
| Application of hydraulically filled bags in flood protection by Vlasák, P. |
| Application of the simplified computational model for analysis of airplane dynamic stability by Daněk, V. |
| Assessment of technical level of mobile robots omni-directional wheels by Knoflíček, R. |
| Axisymmetric wall and liquid jets with swirl by Kolář, V. |
| Biomechanics and computational mechanics – main challenges by Rosenberg, J. |
| Buckling of shells by FEM by Krásný, I. |
| CFD Modeling of the radially symmetric reinforced exhaus system (REEXS) by Krejčí, V. |
| CFD prediction of air quality in the area between two city road tunnel outlets considering moving cars by Katolický, J. |
| Carrying roller stress-state analysis of conveyer routes by Janda, B. |
| Charpy V-notch impact test: modelling and experiment by Lísek, M. |
| Circuit resistance modeling in failing heart rotary pump support by Musil, J. |
| Comparative study of the parametrization techniques in vibration based damage detection of welded test structure by Titurus, B. |
| Compensation of thermal deformations of the machine tools by Soldát, J. |
| Comprehensive investigation of properties and behaviour of natural ceramics EUCOR by Pešlová, F. |
| Computational Methods for Analysis of Behaviour of Rotors Supported by Squeeze-Film Dampers and Fluid-Film Bearings by Zapoměl, J. |
| Computational modeling of high-frequency noise of vehicles using sea by Švancara, P. |
| Computational modelling of the influence of area tolerance on the contact pressure between the hip joint endoprosthesis parts by Fuis, V. |
| Computational simulation of forward extrusion by Janíček, L. |
| Computational simulation of the influence of material porosity on test specimen behaviour by Janíček, P. |
| Computer modelling of effect of transversal tubules on excitation-contraction coupling in cardiac cells (basic study) by Pásek, M. |
| Contribution to computations of temperature field of aluminium casting by Mazánková, M. |
| Controlled drive systems (Analysis, Modelling and Research) by Kratochvíl, C. |
| Controls and sensoric system the mobile robot OMR III by Houška, P. |
| Coupled modeling of geotechnical structures using DSC & TFA model by Procházka, P. |
| Crack detection in rotating machine by Musil, M. |
| Crank Mechanism Simulation – a Module of the Virtual Engine by Píštěk, V. |
| Damping influence on the qualitative properties of nonlinear systems with parametric nonlinearities by Hortel, M. |
| Design analysis of stud tensioner of nuclear reactor main flange joint by Markov, P. |
| Design of finite element models of male vocal tract by Dedouch, K. |
| Detection compacting of the soils under the floor the hall by method dynamic response by Svoboda, B. |
| Determination of the effective thermal conductivity of textile reinforced carbon-carbon composites by Marvalová, B. |
| Does the forest echoe the same you shout at it? (an application of a controlled wave reflection to nucleation research) by Hrubý, J. |
| Dynamic analysis of a bridge structure by Melcer, J. |
| Dynamic response of the thin cylindrical shell on the polyharmonic local loading by Pečínka, L. |
| Dynamics of oscillator with piecawise linear model of soft impacts by Peterka, F. |
| Dynamics of permanent magnetic bearing by Půst, L. |
| Evaluation of effective properties of woven composite tube by Wierer, M. |
| Experimental identification of coupling loss factors used in sea by Beran, V. |
| Experimental investigation of constitutive characteristics of EUCOR material by Kotek, V. |
| Experimental – computational analysis of adhesion and fracture in a composite ”rubber – steel wire rope” by Burša, J. |
| External stabilizer to small bones – description of the operation, workings in static load and results of clinical research by Frankowski, S. |
| Fast stepper motor’s single-step torque response by Szykiedans, K. |
| Fifty years since the production beginning in the joint-stock company ŽĎAS, Žďár nad Sázavou by Petrlík, J. |
| Flexural vibrations of elastic rotor with nonlinear boundary conditions and limited power supply by Ballo, I. |
| Fluid flow in bifurcation, measurements and numerical modeling by Štigler, J. |
| Force conditions at cross rolling by Macura, P. |
| Frequency response functions modelling of the human skull with simulation of brain tissue influence by Pešek, L. |
| Generation of elastic waves by moving source by Ježdík, R. |
| Global view on dynamics of impact oscillator by Peterka, F. |
| Heat transfer efficienty of impinging jets by Pražák, J. |
| Heat transfer in the system of vertical plates by Pavelek, M. |
| Heated ingot transport – theory and practice by Ficek, F. |
| Identification of carbon steel constitutive equations in the semi-solid state by Řídký, R. |
| Identification of global characteristic of damper by Votrubec, R. |
| Identification of nonlinear damping of blades by Balda, M. |
| Identification of nonlinear damping of blades by Balda, M. |
| Identification of nonlinear damping of blades by Balda, M. |
| Identification of nonlinear damping of blades by Balda, M. |
| Identification of parameters of mechanical systems with dissipation layer by Pešek, L. |
| Improvement of static features of machine tool frame by Novotný, L. |
| Incorrect contact of screw surfaces constituting a plane higher kinematic pair by Švígler, J. |
| Influence of bridge structures on river flow by Chára, Z. |
| Influence of grain orientation on threshold values of short fatigue by Náhlík, L. |
| Influence of periodically changing parameter of gear mesh to dynamic behaviour and stability of car gearbox by Dupal, J. |
| Influence of subdomain shapes on solution of equation systems by Kruis, J. |
| Influence of surface corrosion defects on limit load carrying capacity of transmission gas pipelines by Španiel, M. |
| Influence of temperature on Behaviour of magnetic drive with permanent magnets by Krejčí, P. |
| Interaction of viscous incompressible fluid and elastic vocal folds by Damašek, A. |
| Intermittency Analysis in a Jet – Cross-Flow Interaction by Uruba, V. |
| Internal excitation with high frequency in advanced gears with multiple tooth pairs mesh by Doležal, Z. |
| Introduction into numerical computation of the inviscid compressible fluid flow in region with non-stacionary boundary by Hajšman, M. |
| Investigation of the influence of asymmetry in case of the vibration of a resiliently supported plate - application on the vibration of vehicle II. by Volek, J. |
| Investigation of thermal conditions in solar air collectors under natural convection by Jaroš, M. |
| Kinking of fibers in composite agregate by Válek, M. |
| Lubrication of artificial joints – an essentially interdisciplinary problem by Pražák, J. |
| Lumbar vertebra with NORIAN by Florian, Z. |
| Macroscopic approach to stress analysis of aortic aneurysm by Rohan, E. |
| Mandrel coldworking: computation of residual stresses and fatigue crack growth retardation by Materna, A. |
| Material constant determination with FE-analysis support by Vítek, K. |
| Matrix techniques for modeling stress waves in multilayered media by Hora, P. |
| Measurement of the vocal-fold vibration by Horáček, J. |
| Mechanical characteristics of pre-tension of textiles by Stříž, B. |
| Mechanical properties of ductile iron made in ŽĎAS a.s. in dependence on pearlite content and thickness of test sample by Čech, J. |
| Mechatronic size control system in the bar and wire rod mill by Palzer, O. |
| Medical image segmentation based on computing of image characteristics by Nagy, I. |
| Mesh Generation Tool XGEN Based on an Electromagnetic Simulation by Šolín, P. |
| Methods of measurement of vibro-acoustic transfer properties of resilient elements by Žiaran, S. |
| Micromechanical model of ductile fracture by Zemánková, J. |
| Mobile robots structural optimization by Ehrenberger, Z. |
| Modal and spectral properties of the rotor on permanent magnet bearings by Kozánek, J. |
| Model of hydraulic press with pulsating pressure source by Omes, J. |
| Modelling and analysing of the transverse vibrations of the tractor trailer by Holka, H. |
| Modelling of Measuring System for testing of Stepping Motors by Pochanke, A. |
| Modelling of Orifice Flow in Complex Thermodynamic Cycle Simulations by Šolín, P. |
| Modelling of a steam line whip and of a whip restraint by SYSTUS programme by Novotný, J. |
| New opossibilities of creating FEM models from CT/MR data by Kršek, P. |
| Non-stacionary stress state of transversally loaded thin and thick plates by Valeš, F. |
| Numerical and experimental modelling of the elastic wave propagation in the shaft with offsets. Affecting of measurements by transducer’s presence by Morávka, Š. |
| Numerical implementation of generalized non-linear kinematic hardening rule for elastic-plastic constitutive equation by Papuga, J. |
| Numerical simulation of the cardiovascular hemodynamics during hemorrhaging by Převorovská, S. |
| Numerical simulation of wet air flow with phase transition by Zúñiga-González, I. |
| On lateral pressure at rest of granular materials by Koudelka, P. |
| On the Intermittent Nature of the Flow Structure at By-Pass Transition of a Flat Plate Boundary Layer by Jonáš, P. |
| Optical methods of generation and detection of ultrasound wave in thin-wall structures by Trnka, J. |
| Optimization of concasting of steel using mathematical models by Kavička, F. |
| Orbital forming technology at the compacting of powder materials by Rusz, S. |
| Oscillatory flow of polymer blends during extrusion by Filip, P. |
| Parallel computing in mechanics by Bittnar, Z. |
| Possibilities of modelling of quality changing of liquid by Houfek, L. |
| Possibilities of objects linear speed measurement on production lines by Dobiáš, Š. |
| Prediction of the transport properties of multicomponent dense gas mixtures by Pátek, J. |
| Probabilistic lifetime assessment of the high pressure steam piping by Bielak, O. |
| Process analysis of steam tank for vaporing of wood bars by Hloušek, J. |
| Pulse wave velocity measuring - comparision study by Leitermann, D. |
| Quantitative assessment of the T-stress in short fatigue crack propagation by Seitl, S. |
| Recent automotive gearbox synchronization analysis by Štětina, J. |
| Reducing railway wheel - wheelset noisiness using absorbers by Ondrouch, J. |
| Reinforcement learning model: control of nonlinear and unstable processes by Březina, T. |
| Research of free non-isothermal air-jet shapes by Janotková, E. |
| Rheological processes in the surface layer of articular cartilage under loading by Kafka, V. |
| Rock bumps during mining by Kugblenu, M. |
| Rolling of beams in a reversing tandem group in the universal stand by Blažek, A. |
| Separation in high speed internal flows by Dvořák, R. |
| Side trimming shears for thin sheets by Straka, J. |
| Simulation models of vibration of one-dimensional continuum for time-domain analysis by Bubák, A. |
| Simulation of flow around control valve cone by Schuster, M. |
| Simulation of impact’s effects in nonlinear parametric systems by Škuderová, A. |
| Simulations of the haemodynamics in the elastic model of vascular graft by Konfršt, J. |
| Small aerodynamic facility with variable gas density by Mazur, O. |
| Solution of the inverse heat transfer problem in the mold wall at concasting by Heger, J. |
| Some problems of dynamical and acoustical behaviour of tube bundles by Klášterka, H. |
| Some remarks on collapse-models of cavitation bubbles by Bayer, Z. |
| Some remarks on collapse-models of cavitation bubbles by Bayer, Z. |
| Stability analysis of the long journal bearings by Pochylý, F. |
| Stress and reliability analyses of hip joint endoprosthesisi ceramic head under oblique loading by Fuis, V. |
| Stress and strain analysis of constrution parts made from composite materials by Moláček, L. |
| Stress state at femur and tibia under orthese effect by Čulík, J. |
| Stress waves in thin strips with selected sorts of geometrical inhomogeneities by Zemčík, R. |
| Stress-strain analysis of an overlapped connection of artery and vascular graft by Burša, J. |
| Subharmonic resonance of some vibroisolated system by Loudová, J. |
| Substances for the complex modus lubrication in artificial joints by Štol, M. |
| Synovial fluid thixotropy in squeeze-film lubrication of the human synovial joint by Hlaváček, M. |
| Systemic resistance model effect on the cardiovascular system simulation by Leitermann, D. |
| The effect of V-notch on the propagation rate of a fatigue crack by Hutař, V. |
| The effects of mass transfer in rayleigh-plesset bubble dynamics and cavitation modeling in a convergent-divergent nozzle by Zima, P. |
| The influence of stress triaxiality in ductile ligaments of crack upon the fracture toughness by Urbiš, R. |
| The interaction solution between air flow and vocal cords by means of finite element method by Hostička, P. |
| The load-carrying capacity of a cylindrical shell with corrosion damage by Gajdoš, L. |
| The plane stress analysis of the ŠKODA 21 Ab bus suspension beam by Hejman, M. |
| The quantitative exploration of refractory period in human atrial cells by Brožková, K. |
| Thermodynamic of burned gazes in continuous furnaces for rolling mills by Constantinescu, D. |
| Thermodynamic processes and dynamic effects model of two-phase fluid outflow consequent upon the pressure vessel break down by Maxa, J. |
| Transducers and Methods for Torque Measurement during Testing of Stepping Motors by Bodnicki, M. |
| Two-parametric characterisation of a crack growing in the vicinity of the material interface by Gröger, R. |
| Ultrasonic transducer of dynamic friction by Převorovský, Z. |
| Using of artificial intelligence methods for control of manipulators with rotary arm by Grepl, R. |
| Utilization of multibody simulations in creation of the construction design of the low-lewel deck articulated ŠKODA 22 Ab bus by Polach, P. |
| Vibration analysis of the car gear-box by Zeman, V. |
| Vibration of some part of a spherical shell in interaction with compressible filling by Zolotarev, I. |
| Vold-Kalman order tracking filtering as a tool for machine diagnostics by Tůma, J. |
| Waves of whispering galery by Pellant, K. |
| ”RotorDynamics for ANSYS” a new program for rotordynamics analysis by Iván, L. |
guest ::
PDF