1.
|
The purpose of the present research work was the mineralogical, mechanical and microstructure characterization of the gypsum mortars sampled from the internal parts of th [...]
|
2.
|
For rheological description of branched LDPE melts (Escorene LD165BW1 a Bralen RB0323) the following differential constitutive equations were used: eXtended Pom-Pom, Phan [...]
|
3.
|
Abstrakt: After mixing kaolin with water attractive and repulsive forces between kaolin particles initiate process of coagulation and peptisation, respectively. The coagu [...]
|
4.
|
Malášek, J.
Mechanical properties of particular materials (also granular and powdery materials, dispersions, suspensions, liquids with high viscosity,) are usually described by bound [...]
|
5.
|
The aim of this contribution consists in verification of invariantness of uniaxial elongational measurements using the SER Universal Testing Platform with respect to the [...]
|
6.
|
The paper deals with experimental investigation of the dense fine-grained slurries focused on the slurry pressure drops versus average velocity relationship. The content [...]
|
7.
|
The vibration amplitude of rotors excited by imbalance can be significantly reduced if damping devices are inserted between the rotor and its stationary part. To achieve [...]
|
8.
|
For high durability and strength, decreasing of the water to binder ratio of cement is needed by using of fly ash, blast furnace slag as mineral admixture. And it is poin [...]
|
9.
|
The article describes results of durability test of a magnetorheological fluid (MRF) which was carried out in a custom design rheometer. The rheometer design allows measu [...]
|
10.
|
The aim of this contribution is to present an empirical model taking into account ageing of highly concentrated emulsions. This model enables smooth passage from modellin [...]
|
11.
|
The present contribution indicates that precisely the same situation as with the determination of the so-called yield stress of viscoplastic materials concerns also the v [...]
|