Contributors:
Publisher:
Institute of Thermomechanics, AS CR, v.v.i., Prague
Citations:
Engineering Mechanics 2004, I. Zolotarev,A. Poživilová (eds.), Institute of Thermomechanics AS CR, v.v.i., Prague, 2004
ISSN:
1805-8248
ISBN:
80-85918-88-9
Conference Title:
Engineering Mechanics 2004
Conference Venue:
Svratka (CZ)
Conference Dates:
2004-05-10 / 2004-05-13
A thermodynamic model of supercooled water
by Hrubý, J. |
About stability an aeroelastic system
by Zolotarev, I. |
About the dependence of the natural frequencies of a vibroisolation system on the load magnitude and position
by Šklíba, J. |
Adjustment of the equilibrium position of the semiactively controlled suspension of the ambulance-couch
by Alimov, D. |
Analysis and compensation thermal errors of machine tools
by Soldát, J. |
Analysis of a crack growing through an interface of two different materials based on crack tip opening displacement
by Bareš, P. |
Analysis of dynamic stress of planetary transmissions
by Neumann, V. |
Analysis of seismic resistance of nuclear reactors WWER 440/V230 internals
by Markov, P. |
Analysis of the compressible viscous fluid flow through the gap caused by the incorrect contact of screw surfaces
by Vimmr, J. |
Anisotropic models of helical type for thin-walled circural cylindrical shells in membrane condition
by Novotný, R. |
Application of hot-wire anemometry in a wind tunnel modelling of gaseous pollutants spreading
by Moryń-Kucharczyk, E. |
Application of nonlinear data reconciliation method for steam generators data
by Vítek, T. |
Application of thermo-anemometer at physical modelling of pollutant diffusion in atmospheric boundary layer
by Bezpalcová, K. |
Application the ”impact-echo” method to the concrete structure diagnostic in NPP building
by Morávka, Š. |
Approximate computations of pseudospectra
by Kozánek, J. |
Approximation of walking robot stability model
by Krejsa, J. |
Artificial neural network application to walk of a four legged robot
by Bezdíček, M. |
Assessment of experiment reproducibility by finite element analysis
by Pták, S. |
Automatic analyses and recognition of moving objects in the picture by method of phase correlation, Full text,
by Berjak, J. |
Buckling and wrinkling of compressed sandwich beams
by Wierer, M. |
Collision states detection for quadruped robot motion
by Chmelíček, J. |
Complex solutions of material tests
by Frydrýšek, K. |
Computational and experimental modeling of synchronous generator fan
by Vlach, R. |
Computational and experimental modelling of the backbone element with applied fixator
by Šlechtová, M. |
Computational simulation of cold forming of bolts and prediction of material damage during the process
by Petruška, J. |
Computational simulation of forced oscillation of the vocal folds in 3D space
by Přikryl, K. |
Computer solving of spine deformation
by Čulík, J. |
Computing technique in contact fatigue
by Halama, R. |
Constitutive model of vascular smooth muscle cells determined using computational simulation
by Lebiš, R. |
Constrained identification of constants in polynomial models of hyperelastic materials
by Fridrich, F. |
Contact of cylindrical surfaces with elastic incompressible coatings
by Hlaváček, M. |
Contact static analyse of wheel and rail by FEM
by Podruh, J. |
Continuous Q-learning application
by Věchet, S. |
Control of dynamic stability of moving the four-legged walking robot
by Houška, P. |
Control of experimental walking robot using simulating model
by Grepl, R. |
Conveying of coarse particle in non-Newtonian slurry
by Vlasák, P. |
Cooling of synchronous machine winding using heat pipe
by Vlach, R. |
Cutting quality improvement on cross cutting shears
by Straka, J. |
Description of state behavior along the critical isotherm and along the saturation curve using simple equations of state. Part III
by Bayer, Z. |
Design and computation the box of hydraulic scrap shear CNS 320 K
by Jaitner, A. |
Design and optimization of external plastic panels of vehicles
by Potěšil, A. |
Design of bearing from measured data
by Houfek, L. |
Design of small laboratory quadruped robot
by Švehlák, M. |
Determination of Q-function optimum grid applied on asynchronous electric motor control task
by Marada, T. |
Determination of limit pressure of pipeline with defect by energetic criterion
by Novotný, C. |
Developing damage models for concrete
by Brož, P. |
Domain decomposition method with sparse direct solver
by Kruis, J. |
Dynamic action at electric locomotion drive system at rise of slip of wheelset
by Lata, M. |
Dynamic bridge response for truck with controlled suspensions
by Šmilauer, V. |
Dynamic effects analysis of tire models simulations
by Blekta, J. |
Dynamic response of building from groundborne vibration loading
by Makovička, D. |
Dynamic response of the Lagrange and Timoshenko beam on the moving load
by Pečínka, L. |
Effect of surface layers on the propensity of disk brakes to frictionally excited thermoelastic instability during extreme braking
by Voldřich, J. |
Envelope of modulated harmonic components extraction from noise and vibration signals
by Tůma, J. |
Evolution of the mock-line of cardiovascular system circuit
by Chlup, H. |
Experimental acoustic modal analysis of a male vocal tract model
by Horáček, J. |
Experimental and numerical modelling of flow around the obstacles placed on a channel bottom
by Hoření, B. |
Experimental evaluation of drag rotation coefficient of the spherical particle
by Lukerchenko, N. |
Experimental investigation on basic mechanical properties of the sandstone masonry
by Bouška, P. |
Experimental-numerical evaluation of the surface plastic strain evolution
by Vavřík, D. |
Exploitation of laser levelling device for estimation of bridges deflection
by Záruba, J. |
FEM computation of stress intensity factor for the chevron notch specimen under 3-point bending
by Vysloužil, T. |
Failure probability of the ceramic component with measured shape deflection of the contact cones for the random position against the counterpart
by Fuis, V. |
Fatigue strength and life of real structures under combined random loading
by Svoboda, J. |
Fatigue strength criterion fit for proportional loaded material
by Fuxa, J. |
Finite element modeling of male vocal tract acoustics considering cleft palate
by Dedouch, K. |
Floating system in the machine tools drives
by Novotný, L. |
Flow control using synthetic jet actuators
by Uruba, V. |
Flow parameters measurement in the channel with the negative step
by Šulc, J. |
Flow parameters measurement in the curved diffuser of the rectangular cross-section
by Zubík, P. |
Forward damage detection method via genetic algorithms
by Čižmár, K. |
Frequency analysis of free vibrations of the beam in postcritical state
by Frantík, P. |
Gears manufacturing and meshing – a didactic poster
by Iwaszko, J. |
Heat transfer with fuzzy coefficients
by Štemberk, P. |
Hybrid architectures of mobile robots
by Vyšín, M. |
Hydraulic shock absorbers modelling in trolleybus multibody simulations of running over a large road unevenness
by Hajžman, M. |
Identification forces in contact wheel–rail
by Culek, B. |
Identification of cause for seizing the tool shifting table on a Closed - Die Forging Press
by Ficek, F. |
Impacts computer simulation using LS-DYNA program
by Salajka, V. |
Incorporation of a vapour cavitation in short lemon hydrodynamical bearings with deep a central groove into computational models of rotor systems - response on unbalance excitation
by Zapoměl, J. |
Interaction of crack and aggregate in concrete
by Keršner, Z. |
Interpretation of effective value of non-stationary building vibration
by Fischer, C. |
Investigation of influence of assymetry in the case of vibration of resiliently supported and coupled three rigid plates application on the vehicle vibrations I
by Volek, J. |
Influence of nonproportional damping on free vibration of slender structures
by Hračov, S. |
Influence of the pre-stressed areas on circular disc vibrations
by Naď, M. |
Ionic concentration changes in the tubular system of rat ventricular cardiac cell model
by Pásek, M. |
Isostatic presses as an equipment for omnidirectional pressing process
by Prokeš, M. |
Iterative model correction based on transfer function
by Musil, M. |
Large deformation analysis of inflated air-spring shell by the finite element method
by Nam, T. H. |
Life exhaustion assessment of pressure vessel of the reactor WWER 1000
by Macák, P. |
Mathematical model of the T-part for unsteady uncompressible fluid flow, the equivalent length setting
by Štigler, J. |
Methodology of the gear transmission optimization from the constant gear mesh point of view
by Zeman, V. |
Mobile robot motion control by means of fuzzy rules
by Krček, P. |
Modeling of response of viscoelastic materials to harmonic loading
by Menčík, J. |
Modeling of the influence of middle ear prosthesis on hearing
by Pellant, K. |
Modelling of electromechanical drive system failures
by Kratochvíl, C. |
Modelling of structures with moving loads
by Novotný, J. |
Modelling of the torsion and combined elongation–torsion tests of hyperelastic cylinders
by Poživilová, A. |
New possibilities of labyrinth seals steam flow limitation
by Tajč, L. |
Numerical implementation of the Leonov model
by Valenta, R. |
Numerical modeling of turbulent flow through a turbine cascade
by Kozel, K. |
Numerical simulation of the human cochlea
by Dušek, D. |
Numerical solution of lateral earth pressures – elastic-plastic solution using FEM and solution using GLPT theory
by Koudelka, T. |
Objective time derivative defined as covariant derivative
by Fiala, Z. |
Occurrence of big droplets in the vicinity of the last stage of a 210MW steam turbine
by Uruba, V. |
On the choice of an adequate phenomenological model for viscoplastic fluids
by David, J. |
Optimalization of steam boiler pipe system
by Jirouš, F. |
Optimisation of the parameters at the passage of the rotor through critical speed by means of proper tuning
by Ballo, I. |
Original theory of the residual stress identification using the hole-drilling method
by Vítek, K. |
Particularized modelling of operating loads of advanced straigh teeth in spur gear mesh
by Doležal, Z. |
Peculiarities of the limit state design theory in geotechnics
by Koudelka, P. |
Preliminary results on the mean flow characteristics of the wet steam downstream the LP stage of a 210MW turbine
by Jonáš, P. |
Probability density assessment of a linear system due to polynomial of the normal noise
by Náprstek, J. |
Proposal of electronically controlled moment screwdriver for drawing screws into bone tissue
by Axman, P. |
Reconstruction of 3D model of the first cervical vertebra
by Medůna, O. |
Relations between frequency equations of beams
by Nánási, T. |
Reliability analysis and optimisation of components with random input variables
by Menčík, J. |
Response of a harmonically excited component fixed to a rubber mount – influence of the rubber mount properties random variability
by Fridrich, F. |
Response of thin cylindrical water filled tank to the impact of pipe element
by Křiváková, J. |
Risk analysis of high rise buildings
by Kolisch, M. |
Robot navigation using Voronoi diagrams
by Šeda, M. |
SBRA method vs. Eurocode-reliability assessment of a steel structure
by Pustka, D. |
Scull vibrations and own voice perception
by Vokřál, J. |
Shock wave in two-phase fluid
by Maxa, J. |
Simulation of control mechanism for change of the stitch density of knitted fabric
by Mrázek, P. |
Some specific features of the rotor dynamic behaviour
by Šimek, J. |
Specimen preparation for microscopic image analysis of engineered cementious composites
by Novák, L. |
Static analysis of long and short journal bearings
by Rak, V. |
Statistical and sensitivity analysis of determination of SEA coupling loss factors using a dual modal formulation
by Švancara, P. |
Stochastic simulation of creep crack growth in test specimens
by Korouš, J. |
Strain localization in structures under bending
by Brdečko, L. |
Stress singularity analysis of bodies with a bi-material notch
by Klusák, J. |
Stress-strain analysis of surgical connection between two aortic parts with different geometry
by Ryšavý, P. |
The computational modeling of the dynamical properties of the Laval’s rotor with the squeeze film damper using the database of additional effects
by Muller, J. |
The computer aided field modelling of multiple disc cutting grinders
by Flizikowski, J. |
The cutting velocity model of multiple disc milling
by Flizikowski, J. |
The decade of the national conference Engineering Mechanics
by Kratochvíl, C. |
The effect of electric drive parameters on vibrations in machine aggregate
by Mudrik, J. |
The influence of DLC surface coat on abrasion of UHMWPE
by Sedláček, R. |
The optimization of dynamic properties of ball screw feed drives
by Bubák, A. |
The problem of the excitation functions generation for the model of the special positional servomechanism of the rangefinder
by Čech, V. |
The problematics of acoustic power determination of flat sources in straitened areas
by Ondrouch, J. |
The problems of effective coefficient of static friction at friction surfaces of joint replacement
by Franta, L. |
The research of residual stress reductions at products
by Macura, P. |
The straight path stability of an array of collinear micro-cracks interacting with an array of circular inclusions
by Profant, T. |
Thermal aspects of friction in joint replacements
by Němeček, R. |
Thermal loading of stationary engine cylinder head
by Španiel, M. |
Thermomechanical processes in compliant damping elements
by Pešek, L. |
To influence of gear backlash and damping in tooth space on dynamics of nonlinear parametric systems with kinematic couplings
by Hortel, M. |
Transversale impact of elastic rod on thin elastic orthotropic rectangular plate II (Flügge’s and Timoshenko-Mindlin’s models)
by Volek, J. |
Two scale modeling of masonry
by Novák, J. |
Uniaxial tension test of human skin in vivo, numerical model of skin and finite element modeling of human skin wounds closure
by Čapek, L. |
Use of X-ray computed tomography for construction of FE models of bones
by Jiroušek, O. |
Use of complex dynamic models in design and control of walking robots
by Grepl, R. |
Use of continuous action reinforcement learning automata for asynchronous electromotor control
by Březina, T. |
VUTBOT 2 mobile robot undercarriage kinematics and submodules of its multiprocessor control system
by Szabó, Š. |
Vibration of bridges under high speed trains
by Frýba, L. |
Visualization and numerical study of confined coaxial jets
by Trávníček, Z. |
Wind tunnel testing of stationary and nonstationary aerodynamic characteristics of the airfoil
by Rozehnal, D. |