1.
|
To provide passive heat storage in buildings, materials exhibiting a phase-change within building operating temperature can be incorporated into the envelope material. Th [...]
|
2.
|
The thermal performance of wall systems is determined by two parameters. The steady-state thermal resistance is well established in building codes. Thermal inertia, the r [...]
|
3.
|
Lime renders can help improve the energy balance of the building itself given their position in the external layer. Indeed, historical masonries have high rates of therma [...]
|
4.
|
Beran, P.
Deterioration of masonry is caused by inordinate loading and by climatic actions. Climatic cyclic thermal stress in structure is incurred by unequal temperature gradient [...]
|
5.
|
Temperature evolution in concrete constructions due to hydration heat presents a formidable problem causing early age cracking and from the chemical point of view changin [...]
|
6.
|
There has been no such engineering method until now to enable water curing in the vertical plane of surface concrete after the removal of concrete form.The Aqua curtain h [...]
|
7.
|
Currently, the precast industry represents 20% of concrete production around the world and the use of steam curing to accelerate hydration has been adopted as one of the [...]
|
8.
|
Ancient mortars have proved to be durable and reliable materials even when submitted to severe conditions of salts and high humidity. This study intends to contribute to [...]
|
9.
|
The need to formulate mortar compositions with adequate durability and compatibility is nowadays one of the major challenges in historical buildings repair. The incorpora [...]
|
10.
|
Ballo, I.
In the paper the properties of active and semi -active suspensions of heavy goods vehicle are compared. The criteria of comparison were the RMS sprung mass vertical accel [...]
|
11.
|
Bayer, Z.
An innovative model of the heat supply to the ideal thermal cycles is based on the following principles: a) heat is proportional to the expansion work, b) it is also prop [...]
|
12.
| |
13.
|
Knowledge of the physical properties of materials is basis for design and mathematical modeling of complex systems, where the materials are used. Frictional properties of [...]
|
14.
|
The concept of apparent thermal conductivity for high-temperature investigations of porous materials taking into account moisture transport, convective and radiative mode [...]
|
15.
|
Smazal, V.
ŠKODA TS a.s. has developed a new generation of curing presses for curing tires for trucks, tractors, and heavy building machines. New presses have many original technic [...]
|
16.
|
Cyclic strain of tyres leads to hysteresis loses. Long-term and repeated deformation damages tenacity of composite structure of tyre, which causes destruction of tyre. Ra [...]
|
17.
|
The manufacturing of tyres requires mastering the control of curing process which has a significant effect of the thermal and mechanical behavior of the formed part. Basi [...]
|
guest ::