11.
|
For the analysis of reinforced concrete it is often necessary to take into account creep, shrinkage and change of stiffness caused by cracking. An effective method for th [...]
|
12.
|
In this paper is solved a 3D analysis of growing crack of the chevron notched three-point-bending specimen. On macroscale the specimen body is modeled as an elastic homog [...]
|
13.
|
The contribution deals with the 3D analysis of the chevron notched three point bending specimen which is used to determine the fracture toughness of brittle matrix compos [...]
|
14.
|
Fatigue is a process of permanent progressive changes in the structure of a material exposed to cyclic loading. This paper describes the strain development in concrete st [...]
|
15.
|
Specific feature of the nuclear power plants is in comparison with coal fired plants the break postulation of each high energy piping. Fluid system is considered as high- [...]
|
16.
|
This paper compares two approaches to the analysis of deflections of reinforced concrete beam structures with consideration of creep. The first is based on simplified met [...]
|
17.
|
Changes of mechanical properties, namely of modulus of elasticity, often play a role of damage accumulation indicators in the framework of fatigue behaviour of composite [...]
|
18.
|
Key green policies of Korea, such as Low Carbon Green Growth, Target Management, and Emission Trading, are first introduced. Recent efforts to systematically develop envi [...]
|
19.
| |
20.
| |
21.
| |
22.
|
This paper deals with a computer simulation of coupled heat and moisture transfer in a reactor vessel which affected shrinkage and creep of the structure. The mathematica [...]
|
23.
|
The contribution deals with a complicated problem of fatigue damage of structure parts, which are loaded by a combination of random forces in tension-pressure and moments [...]
|
24.
|
The paper deals with an old problem of praxis. Structures, in general, are exposed to random excitations, which generate normal and torsional stresses. While an estimatio [...]
|
25.
| |
26.
|
This article is focused on the computational solution of the material tests and their evaluations. Problem deals with torsion low-cycle fatigue tests of steel specimens. [...]
|
27.
|
Corrosion of reinforcing steel in concrete is one of the most influencing factors causing the degradation of reinforced concrete structures, conducting to concrete crack [...]
|
28.
|
This paper presents a simulation of 3D curved crack propagation in a steam turbine blade lock. These fatigue cracks are often initiated near a blade root contact zone. Tw [...]
|
29.
|
Abdominal aortic aneurysm is usually manifested like balloon dilation of the distal aorta. This bulge is probably caused by degradation processes in an arterial wall. Sha [...]
|
30.
|
A two-parameter fracture mechanics method is applied to small cracks near a stress concentrator. The small crack in the present contribution is considered as crack influe [...]
|
31.
|
Cyclic tests with the maximum force in a cycle Fmax = 5,5 kN and the cycle asymmetry ratio R = F min / F max = 0, 1 were carried out on fiat specimens of 5mm in thickness [...]
|
32.
|
Ferfecki, P.
For the purpose of efficient diagnostics of fault conditions the influence of transverse fatigue crack on dynamical behaviour of a rotor system supported by active magnet [...]
|
33.
|
Presented paper deals with computational fatigue strength prediction of high pressure level steam turbine blade pin joints. Quazi-static FE analysis of one turbine disk s [...]
|
34.
|
It is shown that a system with counter-current in- and outflow (U-type flow) in heat exchangers can lead to an even distribution in branched systems with given high tempe [...]
|
35.
| |
36.
|
Paper is focused on comprehensive solution of probabilistic integrity assessment of pressure vessels. Engineering criteria was fully respected during solution, however fr [...]
|
37.
|
Material properties provide the basic inputs for mathematic modeling of material. Creep of cement paste is possible to be assigned to the basic properties. In the paper, [...]
|
38.
|
The calibration of the potential method DC/PD is calculated for the side-grooved CT-sample with point current inputs. The grooves are modelled by a line transition resist [...]
|
39.
|
A 3D elastic-plastic FEM model with small strains was used for simulation of the deformation mechanics at the curved front of the planar fatigue crack growing in the thic [...]
|
40.
|
This article shows: 1. Some studies of a low-cycle material fatigue caused by cyclical contact between two spheres with the same diameters. The spheres are made up from m [...]
|
41.
|
Foundation of buildings in deep ditches under the ground water level highly elevated during floods is a serious problem. Cracking arising due to the combination of hydrat [...]
|
42.
|
The crack growth prediction techniques in the critical area of the small transport aircraft undercarriage bracket has been describe in this paper. Stress-state was determ [...]
|
43.
|
The fatigue crack growth rate in the Eurofer 97 steel was measured by two different methodologies. Small crack growth data were obtained using cylindrical specimens with [...]
|
44.
|
The article is a contribution to numerical simulations of pitting arise phenomena on the gear teeth. The basic assumption of the presented simulations was that pitting (p [...]
|
45.
|
This contribution presents a simple numerical model for crack growth under mode-I compressive fatigue loading. Residual tensile stress at the crack tip, which is responsi [...]
|
46.
|
To the interpretation of crack growth, it is substantial to estimate the plastic region geometry in front of a crack. Performed here is a study for predicting crack growt [...]
|
47.
|
Structures operating at high temperatures are damaged by creep processes. If the structure is also subjected to cyclic loading, the fatigue damage is usually significant. [...]
|