1.
|
The paper deals with a static and fatigue strength criterion based on the theory of the reference normal and shear stresses – see Fuxa, J. (2003) and Fuxa, J. (2004). T [...]
|
2.
|
Paper considers the task of forecasting of individual remaining resource of metal wares of bridge cranes when their life time corresponding to norm is elapsed. Decision o [...]
|
3.
|
A two-parameter fracture mechanics method is applied to small cracks near a stress concentrator. The small crack in the present contribution is considered as crack influe [...]
|
4.
|
Fatigue is a process of permanent progressive changes in the structure of a material exposed to cyclic loading. This paper describes the strain development in concrete st [...]
|
5.
|
The fatigue crack growth rate in the Eurofer 97 steel was measured by two different methodologies. Small crack growth data were obtained using cylindrical specimens with [...]
|
6.
|
The manufacturing program of ZDAS, a.s. includes the straightening machine of XRK type. The XRK 2-180 straightening machine is an energy-intensive one. Within the framewo [...]
|
7.
|
This paper deals with alternative techniques how to get the velocity signal that is needed for the velocity feedback loop. Common implementation of obtaining the velocity [...]
|
8.
|
This paper presents a simulation of 3D curved crack propagation in a steam turbine blade lock. These fatigue cracks are often initiated near a blade root contact zone. Tw [...]
|
9.
|
Selected approximation curves of mechanical-fracture parameter values − modulus of elasticity, effective fracture toughness, specific fracture energy, compressive cube [...]
|
10.
|
Abstrakt: Článek se zaměřuje na řešení torzního testu pro krátký ocelový vzorek. V průběhu řešení bylo respektováno uchycení v čelistech zkušebního s [...]
|
11.
|
A 3D elastic-plastic FEM model with small strains was used for simulation of the deformation mechanics at the curved front of the planar fatigue crack growing in the thic [...]
|
12.
|
The paper presents the results of the computational modelling of the stress states in the ceramic head of the hip joint endoprosthesis. The analysed system is loaded acco [...]
|
13.
|
It is shown that a system with counter-current in- and outflow (U-type flow) in heat exchangers can lead to an even distribution in branched systems with given high tempe [...]
|
14.
|
Machine parts with non-conformal contact surfaces frequently operate in elastohydrodynamic or mixed regime of lubrication. In surroundings of asperities significant chang [...]
|
15.
|
Structures operating at high temperatures are damaged by creep processes. If the structure is also subjected to cyclic loading, the fatigue damage is usually significant. [...]
|
16.
| |
17.
| |
18.
|
Cyclic tests with the maximum force in a cycle Fmax = 5,5 kN and the cycle asymmetry ratio R = F min / F max = 0, 1 were carried out on fiat specimens of 5mm in thickness [...]
|
19.
|
Wind excited vibrations of slender structures such as towers, masts or certain types of bridges can be reduced using passive or active vibration absorbers. If there is av [...]
|
20.
|
The article is a contribution to numerical simulations of pitting arise phenomena on the gear teeth. The basic assumption of the presented simulations was that pitting (p [...]
|
21.
|
The paper is devoted to the analysis of the contact stresses and contact fatigue, especially at the rolls of rolling mils and railway wheels. The experimental and analyti [...]
|
22.
|
This contribution presents a simple numerical model for crack growth under mode-I compressive fatigue loading. Residual tensile stress at the crack tip, which is responsi [...]
|
23.
|
This article is focused on the computational solution of the material tests and their evaluations. Problem deals with torsion low-cycle fatigue tests of steel specimens. [...]
|
24.
|
This article shows: 1. Some studies of a low-cycle material fatigue caused by cyclical contact between two spheres with the same diameters. The spheres are made up from m [...]
|