1.
|
This paper presents the results of 2 RC rectangular slab (span of 2,65 m, 0,20 m thick) column (0,40×0,40 m) connections. The bottom slab reinforcement over the column c [...]
|
2.
|
Abstrakt: Two medium-term experiments with lateral pressure of flowing loose sand acting on a retaining wall were performed. The experiments showed some rather unexpected [...]
|
3.
|
Design and production of industrial components and materials are nowadays a compromise between the required performances and the environmental impact. In the case of stru [...]
|
4.
|
The paper deals with problems of the actual behaviour of steel expansion anchors to concrete subjected to transversal force. For a long time, on the workplace of the Dept [...]
|
5.
|
FE numerical analysis of floor structure made from clay units HURDIS has proved that the stress state in support region, where failure occurs, is mainly influenced by six [...]
|
6.
|
A substantial number of experimentally based works indicate the changes in crack propagation direction on bi-material interface in composite laminate materials. The paper [...]
|
7.
|
A 3D elastic-plastic FEM model with small strains was used for simulation of the deformation mechanics at the curved front of the planar fatigue crack growing in the thic [...]
|
8.
|
This article deal with problems of cracks in bodies with bimaterial interface. The stress and displacement near the front of crack located at the interface between two or [...]
|
9.
|
Abstrakt: Filament winding is an important manufacturing technology of composite. In general, filament wound composite elements can be taken as laminated composite, but d [...]
|
10.
|
The contribution discusses possible approach for the formulation of fracture criteria for the general stress concentrators – especially a surface crack terminating at t [...]
|
11.
|
Karczmarzyk, S.
An exact local model for computing the coincidence frequencies of multilayered sandwich panels and numerical results predicted by the model are presented in the paper. Th [...]
|
12.
|
Under the consideration of the bi-material notch composed of two orthotropic materials the potential direction of the crack initiated from the notch tip is determined fro [...]
|
13.
|
It is well established that most construction materials behave differently under static and dynamic loading. The stress-rate sensitivity of concrete, steel and rock has b [...]
|
14.
|
Červ, J.
In the paper are studied some conditions which are necessary for the existence of Rayleigh (edge) waves in an orthotropic elastic half-plane. A non-zero angle ween body a [...]
|
15.
|
This contribution deals with the modeling of shells. One of the possible methods how to numerically model a shell is to approximate its curved surface by several plane ar [...]
|
16.
|
A finite-element model has been developed to study buckling and postbuckling behaviour of a square plate made of fibre-metal laminate with one or two delaminations. A s [...]
|
17.
|
Kadlec, M.
Polymer composite panels are widely used in aeronautic and aerospace structures due to their high strength vs. weight ratio. The objective of this study is to determine m [...]
|
18.
|
Omishore, A.
The verification of the design reliability of a steel element according to the concepts of standards EUROCODE 3 and EN1990 is presented in the article. Reliability analys [...]
|
19.
|
Blood – aortic wall interaction was investigated in a current work using the uncoupled method. The method is based on alternating, relatively independent solutions of t [...]
|
20.
|
Concrete is represented as a two-phase material in this paper. Behaviour of a crack with its tip on the interface between two different materials - hardened cement paste [...]
|
21.
|
Analysis of laminated plates under static and transient dynamic loading is presented by the meshless local Petrov-Galerkin (MLPG) method. ReissnerMindlin theory is used t [...]
|
22.
|
Limited sources of material and energy rapidly affected a demand for lightweight, efficient and low cost structures, what secondly influenced the developing of new design [...]
|
23.
|
The paper deals with a numerical modeling of laminated 2-D structures. We described the basic failure theories that are commonly used for orthotropic layers. We made the [...]
|