1.
|
The aim of the study was to present influence of the three-dimensional spacing of the bone implants to the stability of bone fracture fixing in biplane external stabilize [...]
|
2.
|
Zacharopoulou, G.
Structures embedding historical, artistic and scientific values and built after 1830 (the date of the establishment of the Modern Greek state) are defined as modern monum [...]
|
3.
|
Zapoměl, Jaroslav
Abstrakt: Rotors belong to the most frequently used components of machine devices. In a number of cases they are coupled with the stationary part through hydrodynamical b [...]
|
4.
|
The paper assess a behavior and an impact of the air flow on two hangar buildings. For the first hangar the investigation was carried out using both wind tunnel testing [...]
|
5.
|
Podešva, J.
The modeling of the mechanical structures with large number of degrees of freedom (DOF) was in the past the problem of the machine time and disk space. On the today’s h [...]
|
6.
|
Based on comparative investigations after a period of six years, a reduction of the ultrasonic velocity of 9% and 11% for two marble statues could be detected. The invest [...]
|
7.
|
Koudelka, P.
Now, the translation in Czech and National Annex of EC7-1 (EUROCODE 7 - Geotechnical design, Part 1: General rules) are made. The principal difference exists between inpu [...]
|
8.
|
Instable behaviour both of the road and tram bridge at the Prague “Chotkova road” up to Klárov and the rock mass around has been monitored long time yet. The movemen [...]
|
9.
|
Peřinková, M.
Use of renovation plasters on historical buildings has its specifics. This type of plasters does not have a historical tradition, due to its composition. By this reason r [...]
|
10.
|
Zapoměl, Jaroslav
Abstrakt: Properties of fluid film bearings are significantly influenced by the shape of the cross section of the holes in the bearing shells. In computational models the [...]
|
11.
|
Zapoměl, J.
The rotor systems consit of two principal components, of a rotor and of a stationary part, and the fluid film bearings are often used as coupling elements. As the clearan [...]
|
12.
|
This article is concerned with capabilities of bifurcation and chaos analysis methods used for analysis of the automotive differential operation and noise. The purpose of [...]
|
13.
|
Koudelka, P.
The Institute of Theoretical and Applied Mechanics gathers long time (from 1997) identification data and shear resistance data of soils into a database. The database make [...]
|
14.
|
Abstrakt: Long-term observation of bridges supported by bearings made of synthetic materials reveals a steady horizontal deformation increase of these elements. This proc [...]
|
15.
|
The paper deals with the modeling and evaluation of stability conditions of the balanced rotating system with rigid discs supported on two anisotropic hydrodynamic bearin [...]
|
16.
|
This contribution is consider with computational modelling of oil film flow stability in long lemon, offset and lemon-offset uncavitated bearings. In this contribution is [...]
|
17.
|
The tilting pad bearings are very often applied in high speed rotating machines. The exact solution of bearing characteristics, including the motion of tilting pads, is v [...]
|
18.
|
The contribution deals with computational modelling of static equilibrium position of centre of the shaft under the cavitated and uncavitated journal bearing. There are c [...]
|
19.
|
This contribution deals with computation of stiffness and damping coefficients of aerostatic bearings. Model of bearings is based on Reynolds equation for compressible m [...]
|
20.
|
This contribution deals with computational modelling of static and dynamic analysis of journal bearings. In this contribution a new theoretical approach to the modelling [...]
|
21.
|
The paper deals with a working prototype of a system for the active vibration control of journal bearings to prevent rotor instability due to the oil film. The controllab [...]
|
22.
| |