1.
|
An experimental investigation was conducted to study the shear strength of full-scale beams constructed with both high-volume fly ash concrete (HVFAC) – concrete with a [...]
|
2.
|
For high fluidity concrete beams with medium-quality recycled coarse aggregate and melt-solidified slag aggregate, we investigated the fresh concrete properties and the b [...]
|
3.
|
Chloride induced corrosion was recognized as one of the major cause of degradation of reinforced concrete structures, layered double hydroxides (LDHs) materials could be [...]
|
4.
|
This paper investigates the process of alkali-carbonate reaction (ACR) in lime-based mortars prepared with certain dolomite aggregate. As binder either pure calcite lime [...]
|
5.
|
Thorn, Andrew
Lithium silicate grouts have been developed as a more cohesive and stronger grout than those achievable with ethyl silicate. A comparison of the two was reported in Pragu [...]
|
6.
|
The first author of the project is the engineering director of a Temple reconstruction project in Turkey. In attempt to produce mortar similar in composition to that foun [...]
|
7.
|
The principle of a steam turbine balanced control system is presented here. The dynamic stress measurement method in parts of valves on its models in the aerodynamic wind [...]
|
8.
|
Linseed oil was commonly used in ancient times as a protective treatment for building materials due to its ability to grant hydrophobic properties. It is an environmental [...]
|
9.
|
Balksten, K.
In order to design a restoration mortar with properties and composition similar to the original mortar, it is important to analyze the historic mortar in several ways. A [...]
|
10.
|
This paper compares two approaches to the analysis of deflections of reinforced concrete beam structures with consideration of creep. The first is based on simplified met [...]
|
11.
|
SASTURKAR, Pandurang. J.
This paper reports test results of 25 grossly under reinforced relatively large size simply supported tapered concrete beams subjected to flexural effects up to failure. [...]
|
12.
|
The consolidation process of old renders with loss of cohesion is nowadays performed usually with inorganic compatible products, such as calcium or barium hydroxide or et [...]
|
13.
|
Sandwich construction elements, i.e. elements formed by two skins and core, excel in high ratio of bending stiffness to weight of construction. This complex is designed i [...]
|
14.
|
This contribution deals with deriving a fourth-order differential equation of the beams deflection with longitudinal variation of material properties. The linear beam the [...]
|
15.
|
Consolidation is a conservation treatment with good potential to be applied to ancient renders, provided that the alterations in the properties of the original mortars re [...]
|
16.
|
Concrete is one of the most commonly used among construction materials. Generally, concrete is produced by using Ordinary Portland Cement (OPC) as binder and it contribut [...]
|
17.
|
The study aims at using Shirasu, which is a pyroclastic flow deposit like volcanic ash, as one of the binders in mortar or concrete. It is one of the unused natural resou [...]
|
18.
|
This study investigates the engineering properties of composite geopolymer mortar manufactured by replacing the slag with metakaolin of 0, 30 and 70% by weight, together [...]
|
19.
|
CaLoSiL E25 is a suspension of nanoparticles of calcium hydroxide in ethanol, which has been developed as a consolidant for lime mortars. As a preliminary study, the beha [...]
|
20.
|
This study investigates performance of slag as an alternative cementitious binder against ordinary Portland cement (OPC), fly ash (FA) and palm oil fuel ash (POFA). To ac [...]
|
21.
|
An experimental investigation is carried out to study the effect of variation in sodium silicate to sodium hydroxide in the geopolymer concrete. Oven dry curing method is [...]
|
guest ::