1.
|
The crack growth prediction techniques in the critical area of the small transport aircraft undercarriage bracket has been describe in this paper. Stress-state was determ [...]
|
2.
|
Loss of adhesion is one of the main forms of degradation of old renders; it can cause the separation of different render layers or the separation of the render and substr [...]
|
3.
|
Almost all empirical models dealing with the flow curves of nonNewtonian fluids can be applied only in the case of monotonous course of these curves. Exceptionally it is [...]
|
4.
|
The paper presents the main problem of the wing airfoil glaze ice accretion prediction: theoretical solution of the flow of a thin water layer on a cold swjace and gradua [...]
|
5.
|
This work is focused on the subgrid modeling in Large Eddy Simulation. The work contains the description of the most used subgrid models including Smagorinsky model, dyna [...]
|
6.
|
Abstrakt: The distribution of the intermittency factor r is discussed in the case of boundary layer by-pass transition. Taking into consideration the turbulent outer stre [...]
|
7.
|
We present a Computational Fluid Dynamics (CFD) model that predicts the sedimentation of activated sludge in a full-scale circular secondary clarifier that is equipped wi [...]
|
8.
|
The contribution deals with the modelling of the rolling contact between the wheel set of the railway vehicle and the curved railway and subsequently with the lateral mot [...]
|
9.
|
One of the main modes of bed load transport is saltation when particles hop up from the bed and follow ballistic-like trajectories. Mathematical models of saltation are m [...]
|
10.
|
Bayer, Z.
The contribution deals with a group of 13 equations of state (EOS), predominantly of the van der Waals type, both classical and also newly developed in the Institute. In [...]
|
11.
|
The paper deals with approximation of spatial distribution of mean downstream velocity of sub-critical turbulent flow in an open rectangular channel with rough bed. New f [...]
|
12.
|
Jonáš, P.
The purpose of the contribution is to collect information on the generation, propagation and coalescence of turbulent spots and calmed regions in a transitional boundary [...]
|
13.
|
Dynamics of separation process of a turbulent boundary layer subjected to adverse pressure gradient is studied experimentally. The Time Resolved PIV method is used to acq [...]
|
14.
|
A new experimental set-up and measuring methods for the investigation of a channel flow with a backward-facing step on one wall are described. The rectangular cross secti [...]
|
15.
|
Rudolf, P.
Flow in a square sectioned 90 deg elbow with extremely small radius of curvature is analysed. Turbulent flow simulations with realizable k-el are performed and compared w [...]
|
16.
|
The article deals with measurement of flow parameters in defined 90° bend profiles of square constant cross section and it´s linking upstream and downstream straight ax [...]
|
17.
|
This work contains the study of turbulent particle-laden channel flow, in which the particles experience a drag force. The method used for simulation of the liquid phase [...]
|
18.
|
Technique and results of measurement of flow parameters in the channel model of rectangular cross-section with a negative bottom step are presented. The flow was alternat [...]
|
19.
|
Results of experiments on fully developed turbulent boundary layer are presented. The boundary layer was generated on a smooth flat wall forming one side of the channel o [...]
|
20.
|
The contribution deals with the experimental and numerical modelling of supercritical turbulent flow in an open channel with an inclined backward-facing step on its botto [...]
|
21.
|
Turbulent flow in a curved channel of the squared cross-section was numerically simulated using the CFX-TASCflow software. Besides the standard k-el and Menter´s k- mode [...]
|