1.
|
The paper is focused on statistical inverse analysis of material model parameters, where statistical parameters of input parameters have to be identified based on experim [...]
|
2.
|
The stability criteria of V-notched bodies under combination of loading modes I and II are suggested and compared in the article. Methodology of stability criterion sugge [...]
|
3.
|
To a basic one-mass self-excited system a tuned absorber is attached the motion of which is influenced by soft impacts. The self-excitation is considered as of van der Po [...]
|
4.
|
The article is a contribution to numerical simulations of pitting arise phenomena on the gear teeth. The basic assumption of the presented simulations was that pitting (p [...]
|
5.
|
There are mechatronic applications, where a slender beam or plate is subjected to static magnetic force generated by an electromagnetic actuator consisting of a solenoid [...]
|
6.
|
Kalousek, Z.
The topic of the paper is the solution of the equilibrium equations for the fiexion of a transversally isotropic fibre and the discussion on the results for the materials [...]
|
7.
|
The principle of a steam turbine balanced control system is presented here. The dynamic stress measurement method in parts of valves on its models in the aerodynamic wind [...]
|
8.
|
Seven ductile fracture criteria are applied to simulation of cold forward extrusion and their performance in prediction of chevron cracks is presented. The criteria are i [...]
|
9.
|
Padevět, P.
Paper described material properties of cement pastes. Cement pastes were made from portland cement. Various water-cement ratio were used (from 0,3 to 0,5). From paste the [...]
|
10.
|
Brož, P.
Stochastic theory for fracture of concrete materials is applied. The fracture process can be described not only under monotonically increasing load but also under time-de [...]
|
11.
|
Sandwich construction elements, i.e. elements formed by two skins and core, excel in high ratio of bending stiffness to weight of construction. This complex is designed i [...]
|
12.
|
This article introduces results of Genetic Programming used for creation of experimental data approximations together with the search for significant parameters of an af [...]
|
13.
|
This paper deals with numerical simulation of the fracture process in cementitious composite specimens. A technique based on physical discretization of continuum is emplo [...]
|
14.
|
The oedometric tests that belong to fundamental laboratory tests are carrying out while the subsoil stiffness in uniaxial strain state corresponds to conditions for the r [...]
|
15.
|
This paper presents the consideration on the change judgement of J integral and Q parameter as the base parameters of two-parameter elastic-plastic fracture mechanics. An [...]
|
16.
|
The masonry constructions are widely used for a long time. Nowadays, new masonry structures are on demand owing to its variety and appealing mechanical properties. Both b [...]
|
17.
|
The contribution discusses possible approach for the formulation of fracture criteria for the general stress concentrators – especially a surface crack terminating at t [...]
|
18.
|
This paper compares two approaches to the analysis of deflections of reinforced concrete beam structures with consideration of creep. The first is based on simplified met [...]
|
19.
|
This contribution deals with deriving a fourth-order differential equation of the beams deflection with longitudinal variation of material properties. The linear beam the [...]
|
20.
|
Abstrakt: Relations between crack opening displacement (CTOD) and other fracture mechanics parameters are of a great importance in fracture mechanics. The basic aim of t [...]
|
21.
|
Under the assumptions of linear elastic fracture mechanics the behaviour of cracks and general singular stress concentrators is studied and compared. The stress distribu [...]
|
22.
|
Presented paper is concerned with the numerical modeling of quasibrittle materials such as concrete. Brancherie and Ibrahimbegovic are authors of a simple model capable o [...]
|
23.
|
The aim of this paper is to investigate the beginnings of crack propagation from sharp V-notches. Stress distribution around the tip of a V-notch is described on the basi [...]
|
24.
|
This article is concerned with capabilities of bifurcation and chaos analysis methods used for analysis of the automotive differential operation and noise. The purpose of [...]
|
25.
| |
26.
|
In this paper is solved a 3D analysis of growing crack of the chevron notched three-point-bending specimen. On macroscale the specimen body is modeled as an elastic homog [...]
|
27.
|
The paper presents the results of the computational modelling of the stress states in the ceramic head of the hip joint endoprosthesis. The analysed system is loaded acco [...]
|
28.
| |
29.
|
Physical and chemical changes in quasibrittle materials loaded with high temperature affect the fracture mechanical behavior of structures. Threepoint bending tests of no [...]
|
30.
|
A two-parameter fracture mechanics method is applied to small cracks near a stress concentrator. The small crack in the present contribution is considered as crack influe [...]
|
31.
|
Fracture behaviour of concrete is studied using two-phase material model. Propagation of a single macrocrack in hardened cement paste (matrix) and aggregate (particle) is [...]
|
32.
|
Fuxa, J.
Fracture strain diagram. Strength criterion as a contribution of physics and mechanics. Review. Definition of the "reference normal" and "reference shear" str [...]
|
33.
|
Presented paper deals with fracture behaviour of carbon fibre reinforced composites on the basis of Portland (PC) and alumina (HC) cement. Carbon fibres can be used for [...]
|
34.
|
The results of fracture experiments and numerical model with sandstone specimens are presented in this paper. The aim is the comparison of selected mechanical/fracture pa [...]
|
35.
|
This paper is focused on fracture energy which belongs to the basic fracture-mechanical characteristics of quasi-brittle materials. This parameter is explored here from t [...]
|
36.
|
Selected approximation curves of mechanical-fracture parameter values − modulus of elasticity, effective fracture toughness, specific fracture energy, compressive cube [...]
|
37.
|
The contribution deals with the 3D analysis of the chevron notched three point bending specimen which is used to determine the fracture toughness of brittle matrix compos [...]
|
38.
|
The paper is focused on definition and application of the simple bending fracture model suitable for precision approximation of measured load–deflection diagrams from [...]
|
39.
|
The basic fracture properties of cement-based composite are ascertained on the basis of test evaluations of the specimens in suitable test configurations. Three-point ben [...]
|
40.
|
Three point bending test of central notched specimen is used for determination of fracture properties of concrete, mortar and hardened cement paste. The properties – e. [...]
|