The Institute of Theoretical and Applied Mechanics 26 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
1.
The gallery wall on which the Bas-reliefs are etched of the Bayon temple in Angkor is made of sandstones. The deterioration caused by penetration of rainwater or groundwa [...]
2.
The main results of a large research project undertaken in order to validate the composition of new ternary cements containing Portland clinker, limestone filler and slag [...]
3.
For high fluidity concrete beams with medium-quality recycled coarse aggregate and melt-solidified slag aggregate, we investigated the fresh concrete properties and the b [...]
4.
Use of ultra high strength concrete (UHSC) is effective in improving durability of concrete structures which should lead to establishment of sustainable society. However, [...]
5.
This study investigates performance of slag as an alternative cementitious binder against ordinary Portland cement (OPC), fly ash (FA) and palm oil fuel ash (POFA). To ac [...]
6.
This study investigates the engineering properties of composite geopolymer mortar manufactured by replacing the slag with metakaolin of 0, 30 and 70% by weight, together [...]
7.
This study investigated the influence of the molten slag as fine aggregates of concrete on the structural performance of RC beams. In the loading test, the mechanical res [...]
8.
Recently, blended cement is needed in order to lower the energy consumption and CO 2 emission from cement industries. On the other hand, waste management and environmenta [...]
9.
It is a fact well known that the active additions improves the mechanical as well as de durability of concrete structures. Usually the materials are tested in laboratory [...]
10.
Self-compacting concretes are special concretes, highly flowable, which can flow into place under their own weight and compacted without any external vibration. In additi [...]
11.
Though discussed a lot, the interfacial transition zone (ITZ), the linking phase between aggregate and bulk paste, still undertakes ambiguity on its knowledge. In this pa [...]
12.
Lime is the most commonly used binder for the preparation of mortars for restoration purposes. In the near future the reviewed EN 459 will standardise a new group of lime [...]
13.
Roman cements were key materials for the economic and easy manufacture of render (stucco) for the exterior of buildings during the nineteenth and early twentieth century. [...]
14.
The deterioration of concrete by sulfuric acid attack in sewage environments has become a serious problem. In this study, it was shown that the resistance to sulfuric aci [...]
15.
The major environmental impact of concrete is caused by CO2-emissions during the cement production. Great potential for the reduction of the global warming potential and [...]
16.
For high durability and strength, decreasing of the water to binder ratio of cement is needed by using of fly ash, blast furnace slag as mineral admixture. And it is poin [...]
17.
Fracture energy tests were carried out on Portland blast furnace cement-type B (BB) concrete where as an internal curing material, partial replacement of course aggregate [...]
18.
Properties of a molten slag and concrete containing the molten slag as a fine aggregate were investigated, which was emitted in Kure City in Hiroshima Prefecture. Water t [...]
19.
NOBATA, Kenji
The manufacture of cement entails impacts in the form of resource and energy use along with GHG generation. BF slag lends itself to reducing such impacts. Studies have in [...]
20.
Currently, the precast industry represents 20% of concrete production around the world and the use of steam curing to accelerate hydration has been adopted as one of the [...]
21.
Ground Granulated Slag, from Blast furnace has been in use in Concrete as partial replacement of cement since a century. Benefits of this hydraulic material are well know [...]
22.
In order to reduce the amount of CO2 gas in cement industry, the use of blended cement is valid. Share of blended cement in Japan, has not changed over last 10 years. One [...]
23.
In this study, optimum combinations of the replacement ratios of fly ash (FA) and ground granulated blast-furnace slag (BS) with cement were examined from the aspect of p [...]
24.
This paper reports on an experimental program investigating the durability and mechanical properties of alkali activated slag concrete (AASC). The AASC was prepared using [...]
25.
In this paper, effect of cement type and expansive additive content on resistance to both drying shrinkage cracking and thermal cracking of concrete using fly ash and gro [...]
26.
Properties of concrete using newly developed high slag cement which includes over 60% ground granulated blast-furnace slag was studied. It is known that conventional high [...]

Haven't found what you were looking for? Try your search on other servers:
recid:2066 in Amazon
recid:2066 in CERN EDMS
recid:2066 in CERN Indico
recid:2066 in CERN Intranet
recid:2066 in CiteSeer
recid:2066 in Google Books
recid:2066 in Google Scholar
recid:2066 in Google Web
recid:2066 in IEC
recid:2066 in IHS
recid:2066 in INSPEC
recid:2066 in INSPIRE
recid:2066 in ISO
recid:2066 in KISS Books/Journals
recid:2066 in KISS Preprints
recid:2066 in NEBIS
recid:2066 in SLAC Library Catalog