The Institute of Theoretical and Applied Mechanics 33 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
1.
Evaluation of RC structures cannot leave aside from adequate structural monitoring, as clearly stated in main international building codes. Internal reinforcement corrosi [...]
2.
This paper presents an experimental investigation on mechanical properties and durability of fibre reinforced concrete (FRC) incorporating polypropylene (PP) fibres expos [...]
3.
Consolidation is a conservation treatment with good potential to be applied to ancient renders, provided that the alterations in the properties of the original mortars re [...]
4.
We present a Computational Fluid Dynamics (CFD) model that predicts the sedimentation of activated sludge in a full-scale circular secondary clarifier that is equipped wi [...]
5.
Self compacting concrete (SCC) is a very fluid concrete that is characterized by its high volume of paste, and the use of superplasticizer. The effects of recycled aggreg [...]
6.
To provide passive heat storage in buildings, materials exhibiting a phase-change within building operating temperature can be incorporated into the envelope material. Th [...]
7.
This paper examines the influence of reinforcement steel elemental composition and surface condition (polished and unpolished) on the corrosion rate of reinforced concret [...]
8.
This paper reports the effect of bacterial calcium carbonate precipitation on sorption of engineered cementitious composites (ECC), a high performance fiber-reinforced ce [...]
9.
Wasted or abandoned tires are an environmental problem worldwide. One way to get rid of them is to grind them into small particles called crumb rubber. During the past ye [...]
10.
The aim of this work was to try to answer the basic question: are the different looking renders surface aspects related to differences in the behaviour of the render laye [...]
11.
Abstrakt:
12.
Lime water treatment on a specific lime mortar was tested and evaluated for effectiveness, showing that after a sufficiently high number of applications (160 cycles, 54-8 [...]
13.
The contribution discusses possible approach for the formulation of fracture criteria for the general stress concentrators – especially a surface crack terminating at t [...]
14.
This paper reports the potential reuse of incineration fly ash (IFA) as cement supplements in the production of engineered cementitious composites (ECC), a unique class o [...]
15.
Properties of a molten slag and concrete containing the molten slag as a fine aggregate were investigated, which was emitted in Kure City in Hiroshima Prefecture. Water t [...]
16.
An existing analytical model is extended to simulate the attack of supercritical CO2 on cementitious materials. First, the existing carbonation model was modified by impl [...]
17.
Electrical resistivity can be used as an indirect method to determine the chloride diffusion characteristics of in situ concrete. Chloride diffusion coefficient pertainin [...]
18.
Standard mortars (sand:cement = 3:1 and w/c = 0.50) were made where Portland cement was replaced with 0, 20, 35, 50 and 65 vol% calcined marl. The compressive and flexura [...]
19.
Reinforced concrete structures are widely constructed in the Persian Gulf region for infrastructures of ports and oil exploration. But these structures are increasingly b [...]
20.
The aim of the project was to define the causes of damages done to two of thirteen busts made by Jerzy Sobocinski in 1971. The collection belongs to The National Museum i [...]
21.
PETCHERDCHOO, Aruz
This paper presents an approach to assess environmental impacts in terms of CO2 resulting from applying combined repairs in order to extend service life of concrete struc [...]
22.
In this research work, a method that gives indications for the fixation of heavy metals in hardened cement paste was developed. The concentrations of heavy metals in the [...]
23.
In the present study, experimental work and theoretical calculation were performed by taking into account the ITZ effect, the dilution effect and the tortuosity effect, t [...]
24.
Experimental work has been carried out in order to describe the influence of hot mixing on the properties of hardened mortars in comparison with mortars made of lime hydr [...]
25.
It is well-known that different slaked limes (calcium hydroxide) influence the plastic properties of fresh mortar differently. There is not sufficient scientific literatu [...]
26.
In order to reduce the amount of CO2 gas in cement industry, the use of blended cement is valid. Share of blended cement in Japan, has not changed over last 10 years. One [...]
27.
Grouting of historical masonries has been a widely used technique for regaining their integrity or strengthening them. Since cement-based grouts proved very strong and in [...]
28.
The corrosion caused by the action of chloride ions represents the greatest threat to the durability and service life of reinforced concrete structures. This pathological [...]
29.
The paper deals with the perfusion in hierarchically arranged double porous media constituted by transversely periodic layers. In each layer the reference periodic cell i [...]
30.
In Japan, it is expected to use much the recycled aggregates for concrete because concrete wastes have been increasing but natural aggregate resources have been decreasin [...]
31.
Use of ultra high strength concrete (UHSC) is effective in improving durability of concrete structures which should lead to establishment of sustainable society. However, [...]
32.
This study investigates performance of slag as an alternative cementitious binder against ordinary Portland cement (OPC), fly ash (FA) and palm oil fuel ash (POFA). To ac [...]
33.
Chloride induced corrosion was recognized as one of the major cause of degradation of reinforced concrete structures, layered double hydroxides (LDHs) materials could be [...]

Haven't found what you were looking for? Try your search on other servers:
recid:2197 in Amazon
recid:2197 in CERN EDMS
recid:2197 in CERN Indico
recid:2197 in CERN Intranet
recid:2197 in CiteSeer
recid:2197 in Google Books
recid:2197 in Google Scholar
recid:2197 in Google Web
recid:2197 in IEC
recid:2197 in IHS
recid:2197 in INSPEC
recid:2197 in INSPIRE
recid:2197 in ISO
recid:2197 in KISS Books/Journals
recid:2197 in KISS Preprints
recid:2197 in NEBIS
recid:2197 in SLAC Library Catalog