Contributors:
Publisher:
Institute of Theoretical and Applied Mechanics AS CR, Prague
Citations:
Engineering Mechanics 2003, J. Náprstek, C. Fischer (eds.), Institute of Theoretical and Applied Mechanics AS CR, Prague, 2003
ISSN:
1805-8248
ISBN:
80-86246-18-3
Conference Title:
Engineering Mechanics 2003
Conference Venue:
Svratka (CZ)
Conference Dates:
2003-05-12 / 2003-05-15
| 3D FE analysis of bridged crack growing from the chevron notch of 3-point bending specimen
by Vysloužil, T. |
| 3D mathematical model of spherical particle saltatory movement in open channel with rough bed
by Lukerchenko, N. |
| A comparison of PID and PPF controllers in the field of vibration suppression
by Fenik, Š. |
| A contribution to the sensitivity analysis and spectral tuning of the rotating systems
by Zeman, V. |
| A mathematical model for centering the position of a rolled ring in the course of rolling the ring
by Učeň, O. |
| A stability of the flow in the thin circular gap
by Pochylý, F. |
| Acoustic analysis of velopharyngeal insufficiency
by Vokřál, J. |
| Adaptive technique in nonlinear problems
by Svoboda, L. |
| Analysis of flow in a square-sectioned elbow
by Rudolf, P. |
| Analysis of frictionally excited thermoelastic instability and hot spots in automotive disk brakes
by Voldřich, J. |
| Analysis of optimization possibility of reliability testing from the aspect of their realization's costs
by Špetl, J. |
| Analysis of the numerical stability in the solutions of the squeeze film damper
by Müller, J. |
| Application of strain gage hole drilling method as a tool for monitoring influence of techonologies on total stress state in high stressed structures
by Doubrava, K. |
| Application of the experimental identification method for MIMO systems
by Tanzer, M. |
| Automated design of reinforced concrete frames
by Lepš, M. |
| Bending of the fibres with non-continuous dependence of the material parameters on the deformation
by Kalousek, Z. |
| Biomechanical model for optimization of food grinder design
by Flizikowski, J. |
| Bubble nucleation, preliminary cavitation experiments in water and mass transport modelling in the Rayleigh-Plesset equation
by Zima, P. |
| Buffer ring analysis
by Novotný, J. sen. |
| Causes of arising inherent defects as nuclei of brittle fracture
by Polák, K. |
| Changes of temperature induced in selected samples by pronounced pressure variations
by Heller, J. |
| Chaotic attractor shape
by Frantík, P. |
| Choice parameters influence at vehicle track behaviour
by Chalupa, M. |
| Comments to tribological testing of artificial joints
by Pražák, J. |
| Comparison of approaches to determination of hydraulic forces of long squeeze-film dampers
by Zapoměl, J. |
| Comparison of fracture behaviour of a crack and general singular stress concentrators
by Klusák, J. |
| Comparison of mechanical aspects of different treatment methods of human finger tendon contractures
by Kult, J. |
| Comparison of stability criteria of V-notched body under combined mode of loading
by Klusák, J. |
| Computational methods for evaluation of overall response of composite materials
by Wierer, M. |
| Computational modelling of the backbone element with applied fixator
by Šlechtová, M. |
| Computational modelling of thermal field at local annealing of casting
by Ficek, F. |
| Computing evaluation of the vehicle load influence on its steady state and transient directional behaviour
by Socha, J. |
| Concrete as a two-phase material: statistical/sensitivity modelling of failure
by Keršner, Z. |
| Conditional analysis of the wall friction histograms in transitional boundary layers
by Jonáš, P. |
| Constitutive models in geotechnical engineering
by Herle, I. |
| Continuous measurement of track stiffness using a rolling load
by Vymětal, A. |
| Continuous visualization of flow in power fluidic elements and basic analysis
by Peszyński, K. |
| Control aspects of linear motors with an axially compliant suspension of their secondary part
by Souček, P. |
| Control mechanism for the step and continuous change of the stitch density of knitted fabric
by Mrázek, P. |
| Control of electric machine ventilation using artificial intelligence
by Vlach, R. |
| Control of the steam mass flow through the turbine stage
by Jeník, J. |
| Crack growth aspects of mixed modes
by Brož, P. |
| Crack resistance of carbon fibres reinforced composites after high temperature loading
by Matesová, D. |
| Creep-fatigue crack growth in a superheater header
by Korouš, J. |
| Deformation analysis of an inflated cylindrical membrane of composite with rubber matrix reinforced by textile cords
by Marvalová, B. |
| Deformation of the mirror segments for fluorescent detector in Pierre Auger observatory by its own weight
by Pech, M. |
| Description of state behavior along the critical isotherm and along the saturation curve using simple equations of state --- Part I
by Bayer, Z. |
| Design conception of multiprocessor control system for autonomous mobile robot
by Szabó, Š. |
| Design optimization of the connecting rod of the engine Škoda 1,2 HTP
by Potěšil, A. |
| Detection mechanical properties of MACS${}^{\hbox{\sc TL}}$ -- twin screw implant
by Tošovský, J. |
| Determination of SEA coupling loss factors using Finite Element Method
by Švancara, P. |
| Determination of elastic moduli by the resonant ultrasound spectroscopy method
by Kolman, R. |
| Determination of mechanical properties of tendon sutures
by Florian, Z. |
| Development of testing equipment for measuring mechanical properties of cancellous bone
by Jiroušek, O. |
| Development of the total spinal replacement
by Horák, Z. |
| Diagnostics of remainig life of machine parts
by Syzrantsev, V.N. |
| Dynamic interaction of bridge and truck with semi-active suspension
by Šmilauer, V. |
| Dynamic quality analysis of the elevating platform truck
by Čech, V. sen. |
| Dynamic system of suspended ambulance couch
by Šklíba, J. |
| Dynamics of a spherical vibration absorber
by Náprstek, J. |
| Dynamics of gear mesh solution using MATLAB
by Zadražil, V. |
| Dynamics of machine tools spindles
by Bach, P. |
| Effect of the heat transfer on the laminar flow in the entrance region of a circular tube
by Mík, V. |
| Empirical mode analysis of the non-stationary response of the structure vibrating in the wind
by Pospíšil, S. |
| Evaluation criteria of pipeline´s burst pressure
by Novotný, C. |
| Evaluation of the wear resistance with peek and zirconia ceramics
by Sedláček, R. |
| Experience with the establishment of teaching EPD
by Maxa, J. jun. |
| Experimental analysis of contact stresses and contact fatigue
by Macura, P. |
| Experimental analysis of dynamic behaviour of testing pump
by Malenovský, E. |
| Experimental and numerical solutions of contact fatigue
by Frydrýšek, K. |
| Experimental assignment of total drag coefficients of bodies embedded in a free surface stream
by Chára, Z. |
| Experimental determination of stress-strain dependence of non-standard materials
by Vavřík, D. |
| Experimental investigation of floor structures made from clay units
by Bouška, P. |
| Experimental investigation of thermal conditions and energy efficiency of solar air collectors
by Jaroš, M. |
| Experimental study of semi-solid steel deformation
by Řídký, R. |
| Experimental verification of extreme dynamic load effects on building structure
by Záruba-Pfeffermann, J. |
| FEM analysis of preloaded ball of ball screw apparatus
by Novotný, L. |
| FEM analysis of workpiece exchange manipulation system of vertical turning centre
by Novotný, L. |
| FETI domain decomposition method applied to solution of contact problem with large displacements
by Dobiáš, J. |
| Fatigue analysis of defects in pipe welds from view of position and geometry
by Němec, J. |
| Fatigue crack growth prediction in the small transport aircraft landing gear bracket
by Doubrava, R. |
| Finite element model of human skull for investigation of extreme stress state
by Jíra, J. |
| Finite element model of male vocal tract considering clefting and interaction between hard palate and acoustic spaces
by Dedouch, K. |
| Finite element modelling of viscous incompressible fluid flow in glottis
by Damašek, A. |
| Flow of mixture through bifurcation
by Štigler, J. |
| Fracture behaviour of the short crack near the stress concentrator
by Hutař, P. |
| Fracture strain diagram and strength criterion
by Fuxa, J. |
| Fundamental dynamic characteristics of human skull
by Horáček, J. |
| Geometric synthesis of face helicoids
by Abadjieva, E. |
| Geotechnical and Geophysical study of the stability of the rock bridge "Pravčická brána"
by Svoboda, B. |
| Height profile measurement by means of white-light interferometry
by Pavlíček, P. |
| History of structure-ground interface friction during active movements - experiment E1
by Koudelka, P. |
| Identification of damper with magnetoreological fluid
by Votrubec, R. |
| Influence of actual spur gears local tooth load on its scuffing resistance criteria
by Doležal, Z. |
| Influence of constraint effect on transfereability of fracture mechanics characteristics
by Vlček, L. |
| Influence of cross-coupling on aircraft dynamic stability
by Daněk, V. |
| Influence of mechanical loading on the rise and development of osteoarthrosis in the hip joint
by Horák, Z. |
| Influence of the measured contact cone shape deflections of the hip joint endoprosthesis on the stress and reliability values
by Fuis, V. |
| Influence of the shape of a roller gap when rolling on rolling stock straightness
by Pokorný, A. |
| Integrity of piping systems with random number of defects exposed to internal pressure
by Bína, V. |
| Inverse kinematic modelling in SIMMechanics and application for robotic mechanisms
by Grepl, R. |
| Investigation of influence of asymmetry in case of the vibration of a resiliently supported plate --- application on the vibration of vehicle IV
by Volek, J. |
| Kinematic accuracy of a simple open chain by using automatic differentiation
by Němeček, M. |
| Kinematic parameters of needle mechanism of invisible stitching sewing machine
by Barborák, O. |
| Large deformation --- large amount of unknown
by Fiala, Z. |
| Laser-generated ultrasound in solids
by Blaháček, M. |
| Leakage of water from linepipe as the way for determination of the size of a through crack in the wall
by Gajdoš, Ľ. |
| Levitation electromagnet
by Patočka, M. |
| Losses in transition segments between stages with different admission rates
by Polanský, J. |
| Main problems of cutting spiral bevel gears with duplex helical method
by Płocica, M. |
| Mathematical models of machine tool drives with ball screws
by Bubák, A. jun. |
| Measurement of acoustical emissions of gearboxes
by Ondrouch, J. |
| Measurement of mechanical vibration with six degrees of freedom
by Čech, V. jun. |
| Minimise of vibration of some selected points of the discrete --- continuous systems by means of the structure synthesis of the receptances
by Holka, H. |
| Model of disintegration of hot rock-like materials by water jet
by Hlaváč, L. |
| Modelling and simulation of mechanical parameters of bone fracture slot using external fixation
by Jasińska-Choromańska, D. |
| Modelling of production of Czech formants by vocal folds model
by Přikryl, K. |
| Modelling of the human inner ear
by Janovský, P. |
| Most important results of the investigation of the impact oscillator dynamics obtained during finished projects GA CR and COST
by Peterka, F. |
| New knowledge in control method of ŽĎAS forging presses
by Bubák, A. sen. |
| Non-Newtonian liquids: determination of a value of viscosity characterising the initial newtonian plateau
by David, J. |
| Non-destructive observation of damage processes by X-ray dynamic defectoscopy
by Vavřík, D. |
| Non-linear regression application in identification of hyperelastic constitutive models of soft tissues
by Vajdák, M. |
| Nonlinear behavior analysis of filament --- wound composite tubes
by Sun, J. |
| Numerical FEM analysis of hole - drilling method
by Vítek, K. |
| Numerical integration and differentiation of sampled time signals by using FFT
by Tůma, J. |
| Numerical methods of solution for lateral earth pressure
by Koudelka, T. |
| Numerical simulation of floor structure with clay units Hurdis
by Vokáč, M. |
| Numerical simulation of self-oscillations of human vocal folds based on aeroelastic theory
by Horáček, J. |
| Numerical solution of problems of finite hyperelasticity
by Poživilová, A. |
| Oil film flow stability of long lemon and offset bearings
by Rak, V. |
| On interpolation of homogenized coefficients for analysis of large deformation
by Rohan, E. |
| Parametric identification of unbalance rotating machines in operation
by Musil, M. |
| Parametric study of acetabular cup migration
by Jírová, J. |
| Passage of a flexible slender rotor through critical speed
by Ballo, I. |
| Passenger´s seat design accordingly to FAR 23
by Španiel, M. |
| Penalty formulation of the method of free hexagons
by Procházka, P. |
| Physical modelling system hydraulic resistance CVS
by Chlup, H. |
| Pipeline transport of fossile fuels
by Vlasák, P. |
| Potentionality of AC servodrives motion irregularity elimination by compensation of inverter nonlinearities
by Klíma, B. |
| Prediction of growth of the aortic aneurysm using artificial neural network
by Horný, L. |
| Prediction of turbulent flow in a curved channel using various turbulence models
by Příhoda, J. |
| Preliminary results on experimental investigation of a jet --- shear flow interaction
by Uruba, V. |
| Pressing line with LKTA 450 press
by Řebík, B. |
| Pressure drop in flow systems of steam boilers
by Jirouš, F. |
| Psychoacoustic parameters of auto cab from mathematical modelling
by Pellant, K. |
| Quantitative modelling of effect of transverse-axial tubular system on electrical activity of cardiac cells: development of model II
by Pásek, M. |
| Reliability analysis using Monte Carlo simulation and bounded histograms of input random variables
by Václavek, L. |
| Reliability assessment of CAMOSUC method
by Pirner, M. |
| Reliability assessment of structure expressed to impact
by Janas, P. |
| Reliability of selected ductile fracture criteria
by Šuta, J. |
| Replacement of pressure vessel gaseous content by successive filling and discharging
by Maxa, J. sen. |
| Research and development of drive systems at Institute of Solid Mechanics
by Kratochvíl, C. |
| Robot navigation using genetic algorithm and case-based reasoning
by Šeda, M. |
| Rotor supported on magnetic bearings --- numerical and experimental analysis
by Půst, L. |
| SBRA method and development of its application
by Pustka, D. |
| Selected problems on car bogie systems simulations
by Mevald, J. |
| Self-excited two-mass system with soft impacts
by Tondl, A. |
| Simplified model of subsoil-structure interaction
by Fajman, P. |
| Simulation of fuel consumption in the 3rd generation mobile power stations
by Kalous, J. |
| Simulation of resistance curves using Gurson plasticity model
by Korouš, J. |
| Simulation of the current distribution over the electrode surface in a lead-acid cell with help of the software ANSYS - dynamic state
by Křivák, P. |
| Simulation of the current distribution over the electrode surface in a lead-acid cell with help of the software ANSYS - static state
by Bača, P. |
| Simulation of the fall of a standing passenger against the composite doors of the Škoda 14 Tr M trolleybus during an unexpected avoidance manoeuvre
by Polach, P. |
| Singular cases of the planar parallel robot
by Belda, K. |
| Solution of inverse kinematic problem of manipulator in MATLAB
by Bartko, R. |
| Solution of the flow in the thin gap between rotating shaft and flexible coating
by Pochylý, F. |
| Some conditions for existence of R-waves in an orthotropic elastic half-plane
by Červ, J. |
| Some consequences of different definition of the strain tensors
by Novotný, R. |
| Special device for determinning mechanical properties of bio-mechanical systems and materials
by Florian, Z. |
| Stack structure response under wind and technical seismicity effects
by Makovička, D. |
| Stochastic characterization of seismograms
by Fischer, C. |
| Strain gauge measurements of deformations on rubber patterns
by Vaněk, F. |
| Stress and strain cycle ahead the curved fatigue crack front in the thick wall
by Oliva, V. |
| Stress-strain analysis of physiological HIP joint with effect of uncertain input material characteristics
by Návrat, T. |
| Stress-strain analysis of surgical connection of arteries
by Ryšavý, P. |
| Structural dynamic identification on the example of compressor-foundation
by Hauptenbuchner, B. |
| Study of interaction of periodical array of colinear cracks with periodical array of circular inclusions in particle composites
by Profant, T. |
| The axially compliant suspension for secondary parts of linear motors
by Bubák, A. jun. |
| The computer simulation of running of railway vehicle with tilting body case type 680 at modernized lines
by Zelenka, J. |
| The control of active magnetic bearing using two-phase Q-learning
by Březina, T. |
| The effect of calcitonin on the bone mechanical resistance
by Rosenkrancová, J. |
| The measurement of flow parameters in square cross section bend
by Zubík, P. |
| The pressure and kinetic specific energy distribution behind the impeller
by Haluza, M. |
| The response of thin cylindrical water filled tank to the impact of pipe element
by Křiváková, J. |
| The static equilibrium position of the center of the shaft of cavitated and uncavitated journal bearings
by Kučera, P. |
| The use of leg landing information for walking robot control
by Houška, P. |
| The using some approximating methods by inverse modelling
by Miček, P. |
| Traction drive of an electric vehicle using an ultracapacitor
by Huták, P. |
| Transport processes: governing equations
by Krejčí, T. |
| Transport processes: numerical solution
by Kruis, J. |
| Transversal impact of elastic rod on thin elastic isotropic and orthotropic rectangular plate
by Volek, J. |
| Tube bending simulations, when using the Finite Element Method
by Přibyl, M. |
| Two-parameter description of cracks in the vicinity of inhomogeneity
by Seitl, S. |
| Using finite element analyzing for calculation of stress-strain conditions of wedge gate valves bodies
by Syzrantsev, V.N. |
| Using hypotheses for calculating fatigue lives of parts exposed to combined random loads
by Balda, M. |
| Using modified Q-learning with LWR for inverted pendulum control
by Věchet, S. |
| Variational formulation of the solution of composites using BEM
by Procházka, P. |
| Vehicle dependability: related cost analysis and requirements optimization
by Weiter, A. |
| Vibration based damage detection via genetic algorithms
by Čižmár, K. |
| Vibration of straight piping under moving load with supercritical velocity
by Pečínka, L. |
| Vibrations of a gable of a church excited by ringing
by Fischer, O. |
| Visco-plastic model with time retardation for high-velocity impact loading of OFE copper specimens
by Plešek, J. |
| Walking gait of four-legged robot obtained through Q-learning
by Březina, T. |
guest ::
PDF