Home > ITAM Library > Proceedings > Engineering Mechanics 2009
 

Engineering Mechanics 2009

Náprstek, Jiří

Contributors:
Fischer, Cyril
Publisher:
Institute of Theoretical and Applied Mechanics, AS CR, v.v.i., Prague
Citations:
Engineering Mechanics 2009, J. Náprstek, C. Fischer (eds.), Institute of Theoretical and Applied Mechanics AS CR, v.v.i., Prague, 2009
ISSN:
1805-8248
ISBN:
978-80-86246-35-2
Conference Title:
Engineering Mechanics 2009
Conference Venue:
Svratka (CZ)
Conference Dates:
2009-05-11 / 2009-05-19

Contributions to this conference

A remark to the reptation theory by Kharlamov, A.A.
A research of behavior of lubrication film under non-steady state conditions by Zimmerman, M.
A test stand for research in journal bearing active control by Tůma, J.
About a possibility of the simplification of the dynamical system with gyroscopic stabiliser by Šklíba, J.
Action of backlashes in double – motor electromechanical drives by Kalous, J.
Active suspension system from the lateral dynamics point of view by Drobný, V.
Aeroelastic balance for tall building model tests by Král, J.
Alternative expression for stable and unstable limit cycles of aeroelastic pendulum by Pospíšil, S.
An algorithm for corner nodes selection in the FETI-DP method by Brož, J.
Analysis and optimization of the shifting mechanism by František, O.
Analysis of continous rail on railway bridge by Mrózek, M.
Analytical solution of gaseous flow in a rectangular microchannel with second-order slip flow boundary conditions by Hajžman, M.
Analytical solution of inverze task for robot with sixth rotational joints and its concrete utilization by Záda, V.
Annular-synthetic-jet actuator large active distances by Tesař, V.
Application of dimension reduction in tunnel excavation problem by Janda, T.
Application of spectroscopic reflectometry to the study of tribological processes in micromechanisms by Medlík, J.
Application of the simulation based reliability analysis to the vibration of impulse tubes by Pečínka, L.
Application of viscoelastic homogenization for concrete creep by Šmilauer, V.
Assesment of the response of the layered rectangular plate to the loading by the sound blast waves by Marton, P.
Assessment, measurement and monitoring of the Old Bridge crossing Danube in Bratislava by Benčat, J.
Boundary layer separation in diffuser by Uruba, V.
CAD concept–visions in recent past and present reality by Laryš, F.
CDCSIS – software for discrete continuous simulation by Čulík, J.
Calibration of constitutive model for trabecular bone based on nanoindentation by Zlámal, P.
Comparison of numerically simulated pressure on the surface of a fluttering profile with experiment in wind tunnel by Horáček, J.
Comparison of strain fields of CT specimen determined by FEM and by termoplastic measurement by Žďárský, M.
Comparison of the deformation and incremental theory of plasticity used for experimental mechanics problems by Vavřík, D.
Computer simulation of ductile fracture in rod cutting process by Hůlka, J.
Contemporary approaches to seizmic analysis of tank with fluid by Mrózek, M.
Contemporary state of the general lateral pressure theory - active pressure by Koudelka, P.
Control of chaos in the dynamic systems by Kratochvíl, C.
Control of sanitary coach at state of equilibrium by Votrubec, R.
Damage cumulation functions of concrete by Jerga, J.
Damping influence on impact effects with prestress in the class of non-linear time heteronymous pseudoplanetary systems by Hortel, M.
Design damping structure by finite element method by Eisner, I.
Determination of actual crack position using digital image correlation by Jandejsek, I.
Determination of flow rate of viscoplastic fluids in annuli using an additive method by Filip, P.
Determination of intrinsic brittleness of concrete using fracture experiment and its simulation by Keršner, Z.
Determination of mechanical properties of thin films by nanocompression by Kuběna, I.
Deterministic and probabilistic analysis of ventilating concrete chimney reliability during earthquake by Králik, J.
Development of fracture process zone in quasi-brittle bodies during failure by Veselý, V.
Digital image correlation for investigation of the shapes of the steel plate girders' walls in the late stages of fatigue by Jahoda, J.
Dispersion properties in homogenized piezoelectric phononic materials by Rohan, E.
Effect of protecting screen on the flow in control valves by Bednář, L.
Effective control of CNS 700 SM shears motions by Prokeš, M.
Evolution of stress-strain diagram of concrete during solidification using fuzzy sets by Pokorná, N.
Experimental investigation of ECC mechanical properties after exposure to aggressive environment by Pekař, J.
Experimental study of pedestrian dynamics in vertical and horizontal direction by Pirner, M.
Extended Delaunay mesh generator by Krybus, D.
Extracting information about coherence in jet flows by Tesař, V.
FETI based parallel solution of contact shape optimization problems by Vondrák, V.
Fatigue parameters of selected fiber concretes on three-point bend specimens by Seitl, S.
Flow behaviour of highly concentrated slurries by Vlasák, P.
Flow near plasma discharge with low-frequency modulation by Uruba, V.
Force effects of jaw crusher mechanism by Kyncl, M.
Forward kinematical solution of hexasphere by structural approximation by Kukula, P.
Fracture analysis of epoxy-aluminum adhesive joint exposed to thermal and structural loads by Korbel, J.
Geometrical factors of a sharp microindentation into viscoelastic materials by Minster, J.
Global factors for reliability verification of reinforced concrete structures by Holický, M.
Hundred years anniversary of Prof. Koloušek by Frýba, L.
Impact of chemical corrosion on mechanical characteristics of wood by Frankl, J.
Improvement of modeling and evaluation of piping systems in nuclear facilities by Markov, P.
Influence of increased bus voltage to motor insulation system by Nesvadba, M.
Influence of spectral properties of combined random loading on fatigue life by Svoboda, J.
Influence of substrate own hardness on the microindentation measurement of thin polymer materials by Zamfirova, G.
Investigations of carbon fibre reinforcement on steel elements by Frýba, L.
Is the logarithmic time derivative simply the Zaremba-Jaumann derivative? by Fiala, Z.
Kinematic analysis of double-body manipulators by Siemieniako, F.
Kinematic excited vibration of bladed disk by Kellner, J.
Kinematical analysis of hexasphere by Valášek, M.
Kinematical calibration of sliding star by Šika, Z.
Kinematics of an undercarriage with ball elements by Lacko, B.
Kriging approximation in cement paste experimental performance by Valtrová, M.
Learning control for robot manipulators by Záda, V.
Loading processes with various spectral properties for fatigue tests by Balda, M.
Local surface temperature monitoring on steamboiler and thermal fatigue assessment by Vincour, D.
Localization properties of isotropic damage models by Horák, M.
MatSol library for solution of contact problems by Markopoulos, A.
Material interface problems solved by domain decomposition methods by Kruis, J.
Measurement and analysis of dynamic properties of active sanitary coach by Votrubec, R.
Measurement of elongational viscosity of PE materials by Švrčinová, P.
Meshless local petrov-galerkin method for modeling of smart structures by Sladek, J.
Microstructural properties of acetabular region of human pelvic bone revealed using micro-CT by Kytýř, D.
Model based design for EC motor control by Hubík, V.
Modelling and behaviour of a bogie on irregular track by Byrtus, M.
Modelling of micro and nano indentation of modern nickel-based superalloys for turbofans by Hrubý, Z.
Modelling of the knee joint arthroplasty by Křen, J.
Motion simulation of a railway vehicle bogie along direct waved railway by Siegl, J.
NASPRO 3.0 – software tool for transformation and vizualization of aircraft structure modal analysis results by Čečrdle, J.
New cable manipulators by Smrž, M.
Next wave of technology by Tesar, D.
Non-contact 3D surface topography measurement of mechanical engineering surfaces by Šamánek, O.
Non-linear analysis of the hinged connection on the roof with lamellar lattice-girders by Tomko, M.
Non-proportional damping effect on dynamic response of footbridges by Hračov, S.
Nonlinear analysis of reinforced concrete wall subjected to blast load by Králik, J.
Nonreversible phenomenon in mortar materials during their cyclic opening and closing cracks by Posch, M.
Numerical modeling of protective sport helmets by Kunecký, J.
Numerical simulation of unsteady flow in a turbine stage including labyrinth seal at the shroud by Jůza, Z.
Numerical solution of compressible flow problems using the finite volume flux-vector splitting schemes on unstructured meshes by Bublík, O.
On Hashin-Shtrikman-Willis variational principles for random heterogeneous lattices by Zeman, J.
On application of distributions to computations of open cross-section thin-walled beams by Sobotka, J.
On application of generalized functions to calculations of thin-walled beams under plane bending considering constrained warping by Sobotka, J.
On modeling process of expression of the fluid saturated medium in screw compression machine by Rohan, E.
On performance of correlation control methods in simulation of random vectors defined by marginals and covariances by Vořechovský, M.
On side sweep of sheet piles straightening by Malec, J.
On simulation of cross correlated random fields using series expansion methods by Vořechovský, M.
Optimalization of the elbow by Svozil, J.
Overheating limit for the velocity measurement by CTA hot-wire anemometry by Antoš, P.
Parameter identification of a leaf spring dynamic model by Hajžman, M.
Parametric sensitivity analysis of pneumatic filters by Siemieniako, F.
Parametric synthesis of linkage mechanisms by dynamic systems by Grešl, M.
Pedestrian level wind near rectangular buildings by Jirsák, M.
Performance tests of the minimum degree ordering implementation by Pařík, P.
Periodicaly stimulated growth and remodelling of the 1D continuum-dynamical analysis by Rosenberg, J.
Phase-synchronised investigations of triggered vortices in impinging jets by Tesař, V.
Physical modelling of cardiovascular system by Klimentová, P.
Post-critical behaviour of beam loaded by follower force by Frantík, P.
Probabilistic approach to the fire resistance of composite columns by Rieger, M.
Properties of the hot-wire probes for simultaneous measurement of the velocity and the binary-mixture concentration by Antoš, P.
Pulsating flow in pipe by Hružík, L.
Random response of a single system due to combined Gaussian and Poissonian excitation by Náprstek, J.
Real–time observation of trabecular bone microstructure during micromechanical testing by Jiroušek, O.
Reduction of the vibration effects actuating in general direction on colliery machine driver by Blekta, J.
Residual spectra of displacements of conventional and electronic cams by Jirásko, P.
Response analysis of building under seismic effects of railway transport by Makovička, D.
Selected problems of nonlinear concrete modelling by Brožovský, J.
Sensitivity analysis in trolleybus vertical dynamics by Polach, P.
Short crack growth in ferritic-pearlitic-bainitic steel by Polák, J.
Simplified dynamic model of the transmission II by Čech, V.
Simulation of an elastic structures vibrating in fluid by Pohanka, L.
Sound speed in the mixture water – air by Himr, D.
Spectral characteristics of the bridge structures due to parasesimic load by Papán, D.
Stability analysis of plane serendipity finite element for explicit linear elastodynamics by Kolman, R.
Stability of Q-Y characteristic of centrifugal pump by Pochylý, F.
Stability of rigid implants with peripheral elastic layer by Jíra, A.
Stabilizing periodic orbits of chaotic regimes in a Kelvin type gyrostat satellite by Guran, A.
Stochastic model and reliability assesment applied for the platinum ore disintegration process by Frydrýšek, K.
Study of the cavitating vortex rope in hydraulic turbines by Rudolf, P.
Study of the semiactive spring and damper behavior in a vehicle suspension by Zuščík, M.
Surface roughness and external flow turbulence joint effect on turbulent boundary layer by Jonáš, P.
Technological description of heat and mass transfer processes in thermal treatment of fruit storage chambers by M. Janczarek, M.
Testing of actively controlled driver’s seat by Apetaur, M.
The analysis of wall temperatures in a fruit storage in the aspect of transient heat flow by M. Janczarek, M.
The boundary condition of the adhesive forces effect on the solid/liquid interface by Fialová, S.
The cavitation effect on the electromagnetic field by Pochylý, F.
The changes in compression strength of wood along and across grain caused by an impact of damage to wood by wood-damaging fungi by Frankl, J.
The influence of the choice of a constitutive relation in the modelling of the wave propagation in pre-stressed medium by Kruisová, A.
The second viscosity of fluids by Habán, V.
Transient vibration of thin rectangular elastic and viscoelastic isotropic and orthotropic plate I by Soukup, J.
Transition from the saltation mode of bed load transport to the rolling mode by Lukerchenko, N.
Travelling waves in rotational machines by Půst, L.
Two equations for description of the pendulum damper by Fischer, C.
Two plates impact problem for testing accuracy and stability of finite element solutions to wave propagation by Gabriel, D.
Usage of mechanism calibrability in design of parallel kinematical structures by Hamrle, V.
Vehicle track dynamic loading simulation by Chalupa, M.
Visualization methods in developments of power axisymmetric nozzle by Peszyński, K.




Record appears in:
ITAM Library > Proceedings



 Record created 2014-11-14, last modified 2014-11-18
Similar records


Front matter and TOC:
Download fulltextPDF Download fulltextPDF (PDFA)
Rate this document:

Rate this document:
1
2
3
4
5
 
(Not yet reviewed)
The Institute of Theoretical and Applied Mechanics :: Search :: Submit :: Personalize :: Help
Powered by Invenio v1.1.3.1022-d8f569
Maintained by fischerc@itam.cas.cz