Home > ITAM Library > Proceedings > Engineering Mechanics 2004
 

Engineering Mechanics 2004

Zolotarev, Igor

Contributors:
Poživilová, Alena
Publisher:
Institute of Thermomechanics, AS CR, v.v.i., Prague
Citations:
Engineering Mechanics 2004, I. Zolotarev,A. Poživilová (eds.), Institute of Thermomechanics AS CR, v.v.i., Prague, 2004
ISSN:
1805-8248
ISBN:
80-85918-88-9
Conference Title:
Engineering Mechanics 2004
Conference Venue:
Svratka (CZ)
Conference Dates:
2004-05-10 / 2004-05-13

Contributions to this conference

A thermodynamic model of supercooled water by Hrubý, J.
About stability an aeroelastic system by Zolotarev, I.
About the dependence of the natural frequencies of a vibroisolation system on the load magnitude and position by Šklíba, J.
Adjustment of the equilibrium position of the semiactively controlled suspension of the ambulance-couch by Alimov, D.
Analysis and compensation thermal errors of machine tools by Soldát, J.
Analysis of a crack growing through an interface of two different materials based on crack tip opening displacement by Bareš, P.
Analysis of dynamic stress of planetary transmissions by Neumann, V.
Analysis of seismic resistance of nuclear reactors WWER 440/V230 internals by Markov, P.
Analysis of the compressible viscous fluid flow through the gap caused by the incorrect contact of screw surfaces by Vimmr, J.
Anisotropic models of helical type for thin-walled circural cylindrical shells in membrane condition by Novotný, R.
Application of hot-wire anemometry in a wind tunnel modelling of gaseous pollutants spreading by Moryń-Kucharczyk, E.
Application of nonlinear data reconciliation method for steam generators data by Vítek, T.
Application of thermo-anemometer at physical modelling of pollutant diffusion in atmospheric boundary layer by Bezpalcová, K.
Application the ”impact-echo” method to the concrete structure diagnostic in NPP building by Morávka, Š.
Approximate computations of pseudospectra by Kozánek, J.
Approximation of walking robot stability model by Krejsa, J.
Artificial neural network application to walk of a four legged robot by Bezdíček, M.
Assessment of experiment reproducibility by finite element analysis by Pták, S.
Automatic analyses and recognition of moving objects in the picture by method of phase correlation, Full text, by Berjak, J.
Buckling and wrinkling of compressed sandwich beams by Wierer, M.
Collision states detection for quadruped robot motion by Chmelíček, J.
Complex solutions of material tests by Frydrýšek, K.
Computational and experimental modeling of synchronous generator fan by Vlach, R.
Computational and experimental modelling of the backbone element with applied fixator by Šlechtová, M.
Computational simulation of cold forming of bolts and prediction of material damage during the process by Petruška, J.
Computational simulation of forced oscillation of the vocal folds in 3D space by Přikryl, K.
Computer solving of spine deformation by Čulík, J.
Computing technique in contact fatigue by Halama, R.
Constitutive model of vascular smooth muscle cells determined using computational simulation by Lebiš, R.
Constrained identification of constants in polynomial models of hyperelastic materials by Fridrich, F.
Contact of cylindrical surfaces with elastic incompressible coatings by Hlaváček, M.
Contact static analyse of wheel and rail by FEM by Podruh, J.
Continuous Q-learning application by Věchet, S.
Control of dynamic stability of moving the four-legged walking robot by Houška, P.
Control of experimental walking robot using simulating model by Grepl, R.
Conveying of coarse particle in non-Newtonian slurry by Vlasák, P.
Cooling of synchronous machine winding using heat pipe by Vlach, R.
Cutting quality improvement on cross cutting shears by Straka, J.
Description of state behavior along the critical isotherm and along the saturation curve using simple equations of state. Part III by Bayer, Z.
Design and computation the box of hydraulic scrap shear CNS 320 K by Jaitner, A.
Design and optimization of external plastic panels of vehicles by Potěšil, A.
Design of bearing from measured data by Houfek, L.
Design of small laboratory quadruped robot by Švehlák, M.
Determination of Q-function optimum grid applied on asynchronous electric motor control task by Marada, T.
Determination of limit pressure of pipeline with defect by energetic criterion by Novotný, C.
Developing damage models for concrete by Brož, P.
Domain decomposition method with sparse direct solver by Kruis, J.
Dynamic action at electric locomotion drive system at rise of slip of wheelset by Lata, M.
Dynamic bridge response for truck with controlled suspensions by Šmilauer, V.
Dynamic effects analysis of tire models simulations by Blekta, J.
Dynamic response of building from groundborne vibration loading by Makovička, D.
Dynamic response of the Lagrange and Timoshenko beam on the moving load by Pečínka, L.
Effect of surface layers on the propensity of disk brakes to frictionally excited thermoelastic instability during extreme braking by Voldřich, J.
Envelope of modulated harmonic components extraction from noise and vibration signals by Tůma, J.
Evolution of the mock-line of cardiovascular system circuit by Chlup, H.
Experimental acoustic modal analysis of a male vocal tract model by Horáček, J.
Experimental and numerical modelling of flow around the obstacles placed on a channel bottom by Hoření, B.
Experimental evaluation of drag rotation coefficient of the spherical particle by Lukerchenko, N.
Experimental investigation on basic mechanical properties of the sandstone masonry by Bouška, P.
Experimental-numerical evaluation of the surface plastic strain evolution by Vavřík, D.
Exploitation of laser levelling device for estimation of bridges deflection by Záruba, J.
FEM computation of stress intensity factor for the chevron notch specimen under 3-point bending by Vysloužil, T.
Failure probability of the ceramic component with measured shape deflection of the contact cones for the random position against the counterpart by Fuis, V.
Fatigue strength and life of real structures under combined random loading by Svoboda, J.
Fatigue strength criterion fit for proportional loaded material by Fuxa, J.
Finite element modeling of male vocal tract acoustics considering cleft palate by Dedouch, K.
Floating system in the machine tools drives by Novotný, L.
Flow control using synthetic jet actuators by Uruba, V.
Flow parameters measurement in the channel with the negative step by Šulc, J.
Flow parameters measurement in the curved diffuser of the rectangular cross-section by Zubík, P.
Forward damage detection method via genetic algorithms by Čižmár, K.
Frequency analysis of free vibrations of the beam in postcritical state by Frantík, P.
Gears manufacturing and meshing – a didactic poster by Iwaszko, J.
Heat transfer with fuzzy coefficients by Štemberk, P.
Hybrid architectures of mobile robots by Vyšín, M.
Hydraulic shock absorbers modelling in trolleybus multibody simulations of running over a large road unevenness by Hajžman, M.
Identification forces in contact wheel–rail by Culek, B.
Identification of cause for seizing the tool shifting table on a Closed - Die Forging Press by Ficek, F.
Impacts computer simulation using LS-DYNA program by Salajka, V.
Incorporation of a vapour cavitation in short lemon hydrodynamical bearings with deep a central groove into computational models of rotor systems - response on unbalance excitation by Zapoměl, J.
Interaction of crack and aggregate in concrete by Keršner, Z.
Interpretation of effective value of non-stationary building vibration by Fischer, C.
Investigation of influence of assymetry in the case of vibration of resiliently supported and coupled three rigid plates application on the vehicle vibrations I by Volek, J.
Influence of nonproportional damping on free vibration of slender structures by Hračov, S.
Influence of the pre-stressed areas on circular disc vibrations by Naď, M.
Ionic concentration changes in the tubular system of rat ventricular cardiac cell model by Pásek, M.
Isostatic presses as an equipment for omnidirectional pressing process by Prokeš, M.
Iterative model correction based on transfer function by Musil, M.
Large deformation analysis of inflated air-spring shell by the finite element method by Nam, T. H.
Life exhaustion assessment of pressure vessel of the reactor WWER 1000 by Macák, P.
Mathematical model of the T-part for unsteady uncompressible fluid flow, the equivalent length setting by Štigler, J.
Methodology of the gear transmission optimization from the constant gear mesh point of view by Zeman, V.
Mobile robot motion control by means of fuzzy rules by Krček, P.
Modeling of response of viscoelastic materials to harmonic loading by Menčík, J.
Modeling of the influence of middle ear prosthesis on hearing by Pellant, K.
Modelling of electromechanical drive system failures by Kratochvíl, C.
Modelling of structures with moving loads by Novotný, J.
Modelling of the torsion and combined elongation–torsion tests of hyperelastic cylinders by Poživilová, A.
New possibilities of labyrinth seals steam flow limitation by Tajč, L.
Numerical implementation of the Leonov model by Valenta, R.
Numerical modeling of turbulent flow through a turbine cascade by Kozel, K.
Numerical simulation of the human cochlea by Dušek, D.
Numerical solution of lateral earth pressures – elastic-plastic solution using FEM and solution using GLPT theory by Koudelka, T.
Objective time derivative defined as covariant derivative by Fiala, Z.
Occurrence of big droplets in the vicinity of the last stage of a 210MW steam turbine by Uruba, V.
On the choice of an adequate phenomenological model for viscoplastic fluids by David, J.
Optimalization of steam boiler pipe system by Jirouš, F.
Optimisation of the parameters at the passage of the rotor through critical speed by means of proper tuning by Ballo, I.
Original theory of the residual stress identification using the hole-drilling method by Vítek, K.
Particularized modelling of operating loads of advanced straigh teeth in spur gear mesh by Doležal, Z.
Peculiarities of the limit state design theory in geotechnics by Koudelka, P.
Preliminary results on the mean flow characteristics of the wet steam downstream the LP stage of a 210MW turbine by Jonáš, P.
Probability density assessment of a linear system due to polynomial of the normal noise by Náprstek, J.
Proposal of electronically controlled moment screwdriver for drawing screws into bone tissue by Axman, P.
Reconstruction of 3D model of the first cervical vertebra by Medůna, O.
Relations between frequency equations of beams by Nánási, T.
Reliability analysis and optimisation of components with random input variables by Menčík, J.
Response of a harmonically excited component fixed to a rubber mount – influence of the rubber mount properties random variability by Fridrich, F.
Response of thin cylindrical water filled tank to the impact of pipe element by Křiváková, J.
Risk analysis of high rise buildings by Kolisch, M.
Robot navigation using Voronoi diagrams by Šeda, M.
SBRA method vs. Eurocode-reliability assessment of a steel structure by Pustka, D.
Scull vibrations and own voice perception by Vokřál, J.
Shock wave in two-phase fluid by Maxa, J.
Simulation of control mechanism for change of the stitch density of knitted fabric by Mrázek, P.
Some specific features of the rotor dynamic behaviour by Šimek, J.
Specimen preparation for microscopic image analysis of engineered cementious composites by Novák, L.
Static analysis of long and short journal bearings by Rak, V.
Statistical and sensitivity analysis of determination of SEA coupling loss factors using a dual modal formulation by Švancara, P.
Stochastic simulation of creep crack growth in test specimens by Korouš, J.
Strain localization in structures under bending by Brdečko, L.
Stress singularity analysis of bodies with a bi-material notch by Klusák, J.
Stress-strain analysis of surgical connection between two aortic parts with different geometry by Ryšavý, P.
The computational modeling of the dynamical properties of the Laval’s rotor with the squeeze film damper using the database of additional effects by Muller, J.
The computer aided field modelling of multiple disc cutting grinders by Flizikowski, J.
The cutting velocity model of multiple disc milling by Flizikowski, J.
The decade of the national conference Engineering Mechanics by Kratochvíl, C.
The effect of electric drive parameters on vibrations in machine aggregate by Mudrik, J.
The influence of DLC surface coat on abrasion of UHMWPE by Sedláček, R.
The optimization of dynamic properties of ball screw feed drives by Bubák, A.
The problem of the excitation functions generation for the model of the special positional servomechanism of the rangefinder by Čech, V.
The problematics of acoustic power determination of flat sources in straitened areas by Ondrouch, J.
The problems of effective coefficient of static friction at friction surfaces of joint replacement by Franta, L.
The research of residual stress reductions at products by Macura, P.
The straight path stability of an array of collinear micro-cracks interacting with an array of circular inclusions by Profant, T.
Thermal aspects of friction in joint replacements by Němeček, R.
Thermal loading of stationary engine cylinder head by Španiel, M.
Thermomechanical processes in compliant damping elements by Pešek, L.
To influence of gear backlash and damping in tooth space on dynamics of nonlinear parametric systems with kinematic couplings by Hortel, M.
Transversale impact of elastic rod on thin elastic orthotropic rectangular plate II (Flügge’s and Timoshenko-Mindlin’s models) by Volek, J.
Two scale modeling of masonry by Novák, J.
Uniaxial tension test of human skin in vivo, numerical model of skin and finite element modeling of human skin wounds closure by Čapek, L.
Use of X-ray computed tomography for construction of FE models of bones by Jiroušek, O.
Use of complex dynamic models in design and control of walking robots by Grepl, R.
Use of continuous action reinforcement learning automata for asynchronous electromotor control by Březina, T.
VUTBOT 2 mobile robot undercarriage kinematics and submodules of its multiprocessor control system by Szabó, Š.
Vibration of bridges under high speed trains by Frýba, L.
Visualization and numerical study of confined coaxial jets by Trávníček, Z.
Wind tunnel testing of stationary and nonstationary aerodynamic characteristics of the airfoil by Rozehnal, D.




Record appears in:
ITAM Library > Proceedings



 Record created 2014-11-14, last modified 2014-11-18
Similar records


Cover page + TOC:
Download fulltextPDF Download fulltextPDF (PDFA)
Rate this document:

Rate this document:
1
2
3
4
5
 
(Not yet reviewed)
The Institute of Theoretical and Applied Mechanics :: Search :: Submit :: Personalize :: Help
Powered by Invenio v1.1.3.1022-d8f569
Maintained by fischerc@itam.cas.cz