Contributors:
Publisher:
Institute of Theoretical and Applied Mechanics, AS CR, v.v.i., Prague
Citations:
Engineering Mechanics 2006, J. Náprstek, C. Fischer (eds.), Institute of Theoretical and Applied Mechanics AS CR, v.v.i., Prague, 2006
ISSN:
1805-8248
ISBN:
80-86246-27-2
1D model of the human vocal and nasal tract
by Radolf, V. |
2D numerical model of channel bed formed of randomly distributed spherical particles.
by Kharlamov, A. |
A construction of the fundamental solution for the dislocation in the anisotropic bi-material body by force of the finite element method
by Ševeček, O. |
A development of the hole-drilling method with an off-center hole for the residual stress measurement
by Švaříček, K. |
A model of $\mbox{I}_{\mbox{Kto}}$-channel function in rat ventricular cardiomyocytes
by Pásek, M. |
A nonlinear bar element with varying stiffness
by Ďuriš, R. |
Along wind random vibrations of a slender structure --- modelling by concentrated masses
by Náprstek, J. |
Along wind random vibrations of a slender structure --- modelling by continuous elements
by Náprstek, J. |
An effective approach to design of interactive mechatronic system
by Grepl, R. |
An investigation of influence of the weighting constants to the optimal controlled active suspension
by Úradníček, J. |
Analysis of dynamic properties of multimotor driving systems
by Kratochvíl, C. |
Analysis of foundation slab of administration building Praha Těšnov: Heat and moisture transfer
by Krejčí, T. |
Analysis of foundation slab of commercial building in Prague Těšnov: Mechanical behavior
by Koudelka, T. |
Analysis of temperatures in the surface layer of a solid in short-term heating followed by cooling
by Menčík, J. |
Analysis of the transient processes in machineaggregates with gear
by Mudrik, J. |
Analysis of vibration power generator
by Singule, V. |
Application of magnetorheological damper in absorption system of car seat
by Votrubec, R. |
Application of passive damper for suppressing footbridge motions
by Pirner, M. |
Application of the logarithmic strain in acoustoelasticity
by Kruisová, A. |
Application of the reverse engineering in the sphere of biomechanics
by Kubíček, M. |
Assessment of the sensor temperature in HWA
by Antoš, P. |
Automatic generation of variational statement
by Nánási, T. |
BLWT approach a wind expose as measured on topography
by Jirsák, M. |
Calculation of the ceramics material parameters from the testing destructions of the heads
by Fuis, V. |
Calculation of the saltation characteristics as functions of the initial parameters
by Piatsevich, S. |
Chosen problems of robots mechanisms control
by Záda, V. |
Comparison of heat transfer in a straight and helical tube and influence of preset singularities on heat transfer in a straight tube at the flow of surfactant solutions
by Mík, V. |
Comparison of nuclear and conventional seismic standards
by Pečínka, L. |
Compliance criteria to be proved by the analysis of a civil engineering structure
by Fischer, O. |
Compression test of a timber core -- ANSYS model and moiré interferometry experiment
by Micka, M. |
Computational modeling of mechanical behaviour of cell
by Lebiš, R. |
Computational modelling of effect of tonsillectomy on production of Czech vowels
by Švancara, P. |
Contact sensor for robotic applications --- verification of functionality
by Krejčí, P. |
Contemporary capability of direct determined probabilistic calculation
by Janas, P. |
Contribution to experimental research of vibro-acoustics of railway wheels with add-on dampers
by Pešek, L. |
Contribution to modelling of wheel-rail contact
by Švígler, J. |
Contribution to the simulations of flow during driver's cabin ventilation
by Schuster, M. |
Control by blowing of the separated flow in a channel with a stepwise expansion
by Jonáš, P. |
Crack tip opening displacement determination for a crack terminating at the bimaterial interface
by Bareš, P. |
Creation of the stable elastic loop
by Frantík, P. |
Description of material properties of hardening concrete inside deck of composite bridge
by Hualde, I. Monzón |
Determination of selected properties of nitridated steel samples by experiment and calculation
by Konečná, H. |
Determination of the small heat exchangers leak
by Horák, V. |
Development of stresses in fiber reinforced structures
by Procházka, P.P. |
Drive of non-convectional stator winding slot cooling by water
by Vlach, R. |
Drop tests used for validation of FE models of human head for HIC assessment
by Kunecký, J. |
Dynamic behaviour of experimental milling machine LM-2 z axis with active vibroabsorbtion design
by Švéda, J. |
Dynamic loading simulation of vehicle track
by Chalupa, M. |
Dynamic model of differentially driven soccer robot
by Grepl, R. |
Dynamics of a beam coupled with a prestressed string
by Frýba, L. |
EWK rupture model in the numerical simulation of the bolt head trimming
by Bořkovec, J. |
Effect of creep in evaluation of nanoindentation of cement pastes
by Němeček, J. |
Effect of different alternatives of self-excitation and damping on the vibration quenching
by Tondl, A. |
Effect of laminectomy on stability of lumbar spine
by Tichý, P. |
Effect of periodic wheel and rail unevenness on behavior of wheel-rail system
by Jandora, R. |
Effect of shearing, coarse particle and drag reducing additives contents on flow behaviour of dense fly ash-water mixtures
by Vlasák, P. |
Effect of the needle diameter on its fatigue failure resistance
by Hollý, R. |
Effect of ultrasound pulsations on suspension sedimentation
by Suchánková, A. |
Elastic cylinder with microstructure
by Nováček, V. |
Energy-based evaluation method of dissipative properties of a biomechanical system
by Barbora, J. |
Engineered cementitious composites (ECC) manufacturing end verification
by Kopecký, L. |
Estimation of density function parameters with censored data from product life tests
by Tůma, J. |
Estimation of discretization error in time and space domain of numerical heat conduction
by Pohanka, M. |
Estimation of generalized stress intensity factor values for structures with thin protective coatings
by Korbel, J. |
Estimation of generalized stress intensity factors by means of mean value of strain energy density factor
by Klusák, J. |
Evaluation of effective thermomechanical properties of masonry based on numerical homogenization
by Vorel, J. |
Evaluation of geometrical properties of aggregate particles
by Rypl, D. |
Experience with the establishment of teaching solidworks.
by Maxa, J. |
Experimental assessment of masonry material characteristics
by Novák, J. |
Experimental investigation of acoustics of a simplified physical vocal tract model for phonation of vowel /a/ by LF pulse excitation
by Kryštůfek, J. |
Experimental measurement of the characteristics of silicone MED 4550 for FEM simulation
by Koukalová, J. |
Experimental measurement pulse wave velocity in elastic tube
by Chlup, H. |
Experimental measurements of the lumbar spine kinematics
by Jirková, L. |
Experimental research of the active vibration isolation system of the driver seat
by Kupka, L. |
Experimental system for the small aircraft propeller testing
by Rozehnal, D. |
Experimental verification of velocity modulation by strong electromagnetic field
by Hlaváčová, I. M. |
Failure rate, bathtub curve and reliability of components and systems
by Menčík, J. |
Fast iterative solvers for the efficient probabilistic reliability assessment of special mechanical systems by the SBRA method
by Praks, P. |
Fast solution of the mobile robot localization problem
by Věchet, S. |
Fatigue strength and life of real structures under combined random loading
by Svoboda, J. |
Flow behaviour of Vočadlo-type fluids during back extrusion
by Filip, P. |
Flow parameters measurement in the channel with negative step of extreme relative height
by Zubík, P. |
Flow within idealised urban canopy
by Bezpalcová, K. |
Frequency spectrum estimation by autoregressive modeling
by Tůma, J. |
Fuzzy distribution of internal forces in seismically loaded frame structure
by Štemberk, P. |
Hardware implementation of active magnetic bearing control
by Pulchart, J. |
Head injury criteria assessment through finite element modelling
by Jiroušek, O. |
Identification of damage model with cracks from results of tensile test and three point bending test
by Kučerová, A. |
Identification of sound sources in hydraulic valve
by Blejchař, T. |
Impact of the shape of the yield surface on the behavior of clayey soils
by Janda, T. |
Improving rapidly exploring random trees method using two trees
by Krejsa, J. |
Increasing in loading capacity of highly loaded sliding bearings by surface modification of their friction surfaces
by Tesker, E. |
Influence of biophysical interface on stability of implant stem
by Jíra, A. |
Influence of constraint on determination of concrete fracture energy
by Veselý, V. |
Influence of interfacial transition zone of cement paste--aggregate on crack propagation: finite element modelling
by Keršner, Z. |
Influence of linear and nonlinear damping on the stability of motion of kinematic pairs of gears
by Hortel, M. |
Influence of position of middle ear prosthesis on mechanics of hearing
by Dušek, D. |
Influence of specimen thickness on elastic-plastic deformation mechanics ahead of the fatigue crack front
by Šimek, O. |
Influence of surface topography on lubricated contacts behaviour
by Švehlák, M. |
Influence of the head diameter of the THR on the value and distribution of the contact pressure inside the polyethylene cup of the THR
by Štekl, M. |
Influence of the hip joint shape to stress field after hemiarthroplasty
by Kytýř, D. |
Influence of the input muscle parameters to the resulting muscle forces
by Vejpustková, M. |
Influence of tonsillectomy on voice and 3D mathematical models
by Vokřál, J. |
Influence of velopharyngeal insufficiency on phonation of Czech vowels
by Vampola, T. |
Influence orography on design wind speeds in the Czech Republic
by Hostýnek, J. |
Interaction between pelvic bone and acetabular component with imperfections in the cement layer
by Vyčichl, J. |
Interplay of size effects in concrete specimens by computational stochastic fracture mechanics
by Vořechovský, M. |
Inverse analysis of loading of the walking undercarriage frame of giant machine ZP 10000
by Ramík, Z. |
Inverse analysis using soft-computing methods: a review
by Kučerová, A. |
Investigation of Poisson's ratio of early age concrete
by Tran, Nam Thanh |
Investigation of vertical vibrations of the Škoda 21 TR low-floor trolleybus model - II
by Volek, J. |
Issues at tool clamping systems
by Novotný, L. |
Life-time prediction of slender structures subjected to turbulent wind
by Pospíšil, S. |
Limit response of masonry plate structure under explosion effect
by Makovička, D. |
Local resistance of surface mounted obstacles
by Chára, Z. |
Longitudinal dynamics of race cars
by Porteš, P. |
Making use of ball elements in multi-direction undercarriages of mobile robot
by Lacko, B. |
Management of hydratation heat evolution
by Valenta, R. |
Material characteristics of the biological materials like input values to the 3D FEM model of the physiological hip joint
by Štekl, M. |
Mathematical model of the truck shoe brake
by Drobný, V. |
Mathematical modeling via delay differential equations
by Kundrát, P. |
Mechanical properties of total knee replacement
by Budinszky, Cs. |
Mechatronics application influence and its estimation in military vehicles
by Vališ, D. |
Mobile robot path planning by means of case-based reasoning and rapidly-exploring random trees
by Krček, P. |
Model of concrete at the early ages
by Frantová, M. |
Model of hydraulic damper with both air and oil vapour caves
by Svoboda, R. |
Model of total knee replacement
by Křen, J. |
Modeling of vocal folds function using FEM II
by Hrůza, V. |
Modelling and dynamical analysis of gear drives vibration considering the influence of nonlinear couplings
by Byrtus, M. |
Modelling of WWER 1000 type reactor vibration by means of decomposition method
by Zeman, V. |
Modelling of the rate-dependent behaviour of filled rubbers
by Marvalová, B. |
Modification of dynamic properties of circular plate using constraining layers
by Naď, M. |
Monolens system for bubble dimension and position measurement
by Hošek, J. |
Multi-lever flow branching
by Tesař, V. |
Multibody analysis of the control assembly drop in the VVER 440/213 nuclear reactor
by Hajžman, M. |
New approach of electric machine winding water cooling
by Vlach, R. |
Non-destructive inspection of a historical wooden structure damaged by fire
by Frankl, J. |
Non-linear analysis of reinforced concrete frame structures and assignment its response to seismic load
by Pohl, K. |
Numerical analysis of a surface crack in protective layers
by Šestáková, L. |
Numerical analysis of interaction of a moving body and streaming medium with high Re number
by Král, R. |
Numerical modeling of quarry-masonry with application to the Charles Bridge
by Sýkora, J. |
Oblique inclined surface voids of thick-walled concrete structures of nuclear power plants --- numerical simulation of impact-echo diagnostic method.
by Morávka, Š. |
On applications of generalized functions to calculations of beam design elements
by Sobotka, J. |
Optical measurement of surface displacements in the vicinity of crack tip
by Valach, J. |
Optical set-up for small volume of liquid surface tension measurement
by Hošek, J. |
Optimal modal properties of milling spindles
by Bach, P. |
Optimalization of current tabs lay -- out of electrodes in a cylindrical type VRLA cells
by Bača, P. |
Optimization procedure for sailplane wing sections
by Popelka, L. |
Orientation of stress tensors in transformed matters
by Malášek, J. |
PLC - Power line communication
by Orság, Z. |
Parallelization of fuzzy problems
by Kruis, J. |
Performance assessment of concrete bridge deck applying SBRA approach and fem model with regard to chloride ingress
by Konečný, P. |
Pollutant diffusion in the idealized build-up area
by Šeděnková, H. |
Position control of robot under endpoint constraints
by Záda, V. |
Possibilities of improvement accuracy of the attitude sensor for walking robot
by Houška, P. |
Post-impact compressive load carrying capacity of fibre-metal laminate plates
by Obdržálek, V. |
Potential of adaptive state control for actuator regulation of machine tool motion axis
by Hornych, T. |
Power grip of hand
by Čulík, J. |
Prediction and verification of the lifetime for the various combined tensile and torsion load
by Hrubý, Z. |
Prediction models for fatigue damage accumulation
by Brož, P. |
Prediction of thermally induced preload in high-speed bearing systems
by Holkup, T. |
Probabilistic assessment of the fatigue life of tubular steel supports of Žďákov bridge
by Marek, P. |
Probabilistic evaluation of unstable crack propagation in pipeline using SBRA method
by Václavek, L. |
Proposal calculations of a new machine for fatigue testing of railway axles
by Frydrýšek, K. |
Re-calibration of the methodology determining burst pressure of pipe with surface defect
by Španiel, M. |
Regulation of vibrating roller parameters in process of compacting cohesive and noncohesive soils
by Kašpárek, J. |
Research reactor IRT-2000 in Sofia reconstruction- design and seismic computation
by Markov, P. |
Rheologic model of mechanical properties of polyurethane foam
by Cirkl, D. |
Self-excited oscillation of the thin-walled elastic tubes
by Chlup, H. |
Selflearning controller of active magnetic bearing
by Turek, M. |
Shape sensitivity analysis for flow optimization in closed channels
by Rohan, E. |
Similarity of shallow foundations according to ČSN 73 1001
by Koudelka, P. |
Simulation model of car wheel suspension
by Pražák, F. |
Simulation of autogenous shrinkage of young cement pastes
by Šmilauer, V. |
Simulation of freezing of rock during tunneling
by Procházka, P.P. |
Simulation of the current distribution through the electrode system in a cylindrical type VRLA cells
by Křivák, P. |
Simultaneous radiographic observation of damaging and optical measurement of 3D surface displacement evolution in loaded specimen
by Vavřík, D. |
Small autonomous robot for practical verifying of artificial intelligence methods
by Marada, T. |
Software development for simulation of general fatigue crack propagation. Pitting prediction application.
by Jurenka, J. |
Solution of temperature and stress fields for combustor flame tube
by Veselý, S. |
Solution of the beams on elastic foundation (deterministic and probabilistic approach)
by Frydrýšek, K. |
Stability assessment of steel frames using SBRA method
by Křivý, V. |
Strain gage used for stress and strain state of the torsion test quantification
by Fuxa, J. |
Strain measurement on the main circulating pump pipeline system TF41 during running up of the nuclear power plant Dukovany, unit IV
by Vincour, D. |
Stress -- strain analysis of an aging motion segment of the ligamentous spine under physiologic compression
by Hudeček, D. |
Stress distribution in human artery based on several types of SEDF
by Horný, L. |
Stress field analysis near the semi-infinite crack tip terminating perpendicular to the interface between two orthotropic materials
by Profant, T. |
Stress rate and incremental principle of virtual work in finite deformations
by Fiala, Z. |
Symmetry group analysis of suddenly accelerated flow past a flat plate
by Tesař, V. |
Technological problems prediction of glass forming in pre-manufacture stage
by Matoušek, I. |
Testing of frequencies generated in water by submerged high-energy liquid jet
by Hlaváč, L. M. |
The analysis of rolling forces and moments at weldless tube rolling
by Macura, P. |
The application of interactive computational system (ICS FEM) in engineering
by Eisner, I. |
The automatic generation of walking policies for a four-legged robot in a non-deterministic space
by Ondroušek, V. |
The computational modeling of the flying shears drive
by Bubák, A. |
The dependence of the vibroisolation effect of the system with three degrees of freedom on the description applied dampers
by Sivčák, M. |
The development of the new type of simple, middle accurate approximations of caloric functions of state of wet steam
by Bayer, Z. |
The effect of overloading of pipes on their fracture toughness in relation to the strength grade of steel
by Šperl, M. |
The experimental apparatus for measurement of characteristics of man-operator of special man-machine system
by Čech, V. |
The experimental investigation of the influence of the flow swirl and the tip clearance jet on aerodynamic characteristics of exhaust hoods
by Tajč, L. |
The influence of specimen geometry on plasticity induced crack closure
by Náhlík, L. |
The material model of railway wheel for numerical simulations of cyclic deformation
by Pejchal, P. |
The multibody simulation of dynamic effects in passenger car trailer
by Blekta, J. |
The necessary power for the operation of semiactive vibration control systems.
by Ballo, I. |
The probability method SBRA used in field of stress relaxation by creep
by Lenert, J. |
The research of vibroisolation at the technical university in Liberec
by Šklíba, J. |
The residual stress determination by the hole drilling method by means of the influence function
by Švaříček, K. |
The ropes bear more
by Kalousek, Z. |
Thermal cycle with extraction of steam for predrying of fuel
by Jirouš, F. |
Three-dimensional analysis of RC beams
by Svoboda, L. |
Transient temperature field in the chamber for measurement of surface tension of supercooled liquids
by Hrubý, J. |
Tuning up parameters of vibration generator
by Hadaš, Z. |
UHMWPE failure in knee joint components
by Franta, L. |
Using the residue theorem for computing of dynamic system response at impulse excitation
by Souček, P. |
Utilization of multibody modelling for design of characteristics of air pressure controlled hydraulic shock absorbers in the SOR intercity bus
by Polach, P. |
Validation and optimization of ISO container for dynamic load at transport
by Sedlák, I. |
Viscoelastic behaviour of composites with rubber matrix reinforced by textile cords
by Marvalová, B. |
Viscoelasticity and growth theory
by Rosenberg, J. |
Whirl flutter analysis of the commuter aircraft aeroelastic model wing -- engine component
by Čečrdle, J. |
Wing airfoil rime ice accretion prediction
by Horák, V. |
ŽĎAS, a. s. Company in Czech and world industry
by Zavadil, R. |