Home > ITAM Library > Proceedings > Engineering Mechanics 2006
 

Engineering Mechanics 2006

Náprstek, Jiří

Contributors:
Fischer, Cyril
Publisher:
Institute of Theoretical and Applied Mechanics, AS CR, v.v.i., Prague
Citations:
Engineering Mechanics 2006, J. Náprstek, C. Fischer (eds.), Institute of Theoretical and Applied Mechanics AS CR, v.v.i., Prague, 2006
ISSN:
1805-8248
ISBN:
80-86246-27-2

Contributions to this conference

1D model of the human vocal and nasal tract by Radolf, V.
2D numerical model of channel bed formed of randomly distributed spherical particles. by Kharlamov, A.
A construction of the fundamental solution for the dislocation in the anisotropic bi-material body by force of the finite element method by Ševeček, O.
A development of the hole-drilling method with an off-center hole for the residual stress measurement by Švaříček, K.
A model of $\mbox{I}_{\mbox{Kto}}$-channel function in rat ventricular cardiomyocytes by Pásek, M.
A nonlinear bar element with varying stiffness by Ďuriš, R.
Along wind random vibrations of a slender structure --- modelling by concentrated masses by Náprstek, J.
Along wind random vibrations of a slender structure --- modelling by continuous elements by Náprstek, J.
An effective approach to design of interactive mechatronic system by Grepl, R.
An investigation of influence of the weighting constants to the optimal controlled active suspension by Úradníček, J.
Analysis of dynamic properties of multimotor driving systems by Kratochvíl, C.
Analysis of foundation slab of administration building Praha Těšnov: Heat and moisture transfer by Krejčí, T.
Analysis of foundation slab of commercial building in Prague Těšnov: Mechanical behavior by Koudelka, T.
Analysis of temperatures in the surface layer of a solid in short-term heating followed by cooling by Menčík, J.
Analysis of the transient processes in machineaggregates with gear by Mudrik, J.
Analysis of vibration power generator by Singule, V.
Application of magnetorheological damper in absorption system of car seat by Votrubec, R.
Application of passive damper for suppressing footbridge motions by Pirner, M.
Application of the logarithmic strain in acoustoelasticity by Kruisová, A.
Application of the reverse engineering in the sphere of biomechanics by Kubíček, M.
Assessment of the sensor temperature in HWA by Antoš, P.
Automatic generation of variational statement by Nánási, T.
BLWT approach a wind expose as measured on topography by Jirsák, M.
Calculation of the ceramics material parameters from the testing destructions of the heads by Fuis, V.
Calculation of the saltation characteristics as functions of the initial parameters by Piatsevich, S.
Chosen problems of robots mechanisms control by Záda, V.
Comparison of heat transfer in a straight and helical tube and influence of preset singularities on heat transfer in a straight tube at the flow of surfactant solutions by Mík, V.
Comparison of nuclear and conventional seismic standards by Pečínka, L.
Compliance criteria to be proved by the analysis of a civil engineering structure by Fischer, O.
Compression test of a timber core -- ANSYS model and moiré interferometry experiment by Micka, M.
Computational modeling of mechanical behaviour of cell by Lebiš, R.
Computational modelling of effect of tonsillectomy on production of Czech vowels by Švancara, P.
Contact sensor for robotic applications --- verification of functionality by Krejčí, P.
Contemporary capability of direct determined probabilistic calculation by Janas, P.
Contribution to experimental research of vibro-acoustics of railway wheels with add-on dampers by Pešek, L.
Contribution to modelling of wheel-rail contact by Švígler, J.
Contribution to the simulations of flow during driver's cabin ventilation by Schuster, M.
Control by blowing of the separated flow in a channel with a stepwise expansion by Jonáš, P.
Crack tip opening displacement determination for a crack terminating at the bimaterial interface by Bareš, P.
Creation of the stable elastic loop by Frantík, P.
Description of material properties of hardening concrete inside deck of composite bridge by Hualde, I. Monzón
Determination of selected properties of nitridated steel samples by experiment and calculation by Konečná, H.
Determination of the small heat exchangers leak by Horák, V.
Development of stresses in fiber reinforced structures by Procházka, P.P.
Drive of non-convectional stator winding slot cooling by water by Vlach, R.
Drop tests used for validation of FE models of human head for HIC assessment by Kunecký, J.
Dynamic behaviour of experimental milling machine LM-2 z axis with active vibroabsorbtion design by Švéda, J.
Dynamic loading simulation of vehicle track by Chalupa, M.
Dynamic model of differentially driven soccer robot by Grepl, R.
Dynamics of a beam coupled with a prestressed string by Frýba, L.
EWK rupture model in the numerical simulation of the bolt head trimming by Bořkovec, J.
Effect of creep in evaluation of nanoindentation of cement pastes by Němeček, J.
Effect of different alternatives of self-excitation and damping on the vibration quenching by Tondl, A.
Effect of laminectomy on stability of lumbar spine by Tichý, P.
Effect of periodic wheel and rail unevenness on behavior of wheel-rail system by Jandora, R.
Effect of shearing, coarse particle and drag reducing additives contents on flow behaviour of dense fly ash-water mixtures by Vlasák, P.
Effect of the needle diameter on its fatigue failure resistance by Hollý, R.
Effect of ultrasound pulsations on suspension sedimentation by Suchánková, A.
Elastic cylinder with microstructure by Nováček, V.
Energy-based evaluation method of dissipative properties of a biomechanical system by Barbora, J.
Engineered cementitious composites (ECC) manufacturing end verification by Kopecký, L.
Estimation of density function parameters with censored data from product life tests by Tůma, J.
Estimation of discretization error in time and space domain of numerical heat conduction by Pohanka, M.
Estimation of generalized stress intensity factor values for structures with thin protective coatings by Korbel, J.
Estimation of generalized stress intensity factors by means of mean value of strain energy density factor by Klusák, J.
Evaluation of effective thermomechanical properties of masonry based on numerical homogenization by Vorel, J.
Evaluation of geometrical properties of aggregate particles by Rypl, D.
Experience with the establishment of teaching solidworks. by Maxa, J.
Experimental assessment of masonry material characteristics by Novák, J.
Experimental investigation of acoustics of a simplified physical vocal tract model for phonation of vowel /a/ by LF pulse excitation by Kryštůfek, J.
Experimental measurement of the characteristics of silicone MED 4550 for FEM simulation by Koukalová, J.
Experimental measurement pulse wave velocity in elastic tube by Chlup, H.
Experimental measurements of the lumbar spine kinematics by Jirková, L.
Experimental research of the active vibration isolation system of the driver seat by Kupka, L.
Experimental system for the small aircraft propeller testing by Rozehnal, D.
Experimental verification of velocity modulation by strong electromagnetic field by Hlaváčová, I. M.
Failure rate, bathtub curve and reliability of components and systems by Menčík, J.
Fast iterative solvers for the efficient probabilistic reliability assessment of special mechanical systems by the SBRA method by Praks, P.
Fast solution of the mobile robot localization problem by Věchet, S.
Fatigue strength and life of real structures under combined random loading by Svoboda, J.
Flow behaviour of Vočadlo-type fluids during back extrusion by Filip, P.
Flow parameters measurement in the channel with negative step of extreme relative height by Zubík, P.
Flow within idealised urban canopy by Bezpalcová, K.
Frequency spectrum estimation by autoregressive modeling by Tůma, J.
Fuzzy distribution of internal forces in seismically loaded frame structure by Štemberk, P.
Hardware implementation of active magnetic bearing control by Pulchart, J.
Head injury criteria assessment through finite element modelling by Jiroušek, O.
Identification of damage model with cracks from results of tensile test and three point bending test by Kučerová, A.
Identification of sound sources in hydraulic valve by Blejchař, T.
Impact of the shape of the yield surface on the behavior of clayey soils by Janda, T.
Improving rapidly exploring random trees method using two trees by Krejsa, J.
Increasing in loading capacity of highly loaded sliding bearings by surface modification of their friction surfaces by Tesker, E.
Influence of biophysical interface on stability of implant stem by Jíra, A.
Influence of constraint on determination of concrete fracture energy by Veselý, V.
Influence of interfacial transition zone of cement paste--aggregate on crack propagation: finite element modelling by Keršner, Z.
Influence of linear and nonlinear damping on the stability of motion of kinematic pairs of gears by Hortel, M.
Influence of position of middle ear prosthesis on mechanics of hearing by Dušek, D.
Influence of specimen thickness on elastic-plastic deformation mechanics ahead of the fatigue crack front by Šimek, O.
Influence of surface topography on lubricated contacts behaviour by Švehlák, M.
Influence of the head diameter of the THR on the value and distribution of the contact pressure inside the polyethylene cup of the THR by Štekl, M.
Influence of the hip joint shape to stress field after hemiarthroplasty by Kytýř, D.
Influence of the input muscle parameters to the resulting muscle forces by Vejpustková, M.
Influence of tonsillectomy on voice and 3D mathematical models by Vokřál, J.
Influence of velopharyngeal insufficiency on phonation of Czech vowels by Vampola, T.
Influence orography on design wind speeds in the Czech Republic by Hostýnek, J.
Interaction between pelvic bone and acetabular component with imperfections in the cement layer by Vyčichl, J.
Interplay of size effects in concrete specimens by computational stochastic fracture mechanics by Vořechovský, M.
Inverse analysis of loading of the walking undercarriage frame of giant machine ZP 10000 by Ramík, Z.
Inverse analysis using soft-computing methods: a review by Kučerová, A.
Investigation of Poisson's ratio of early age concrete by Tran, Nam Thanh
Investigation of vertical vibrations of the Škoda 21 TR low-floor trolleybus model - II by Volek, J.
Issues at tool clamping systems by Novotný, L.
Life-time prediction of slender structures subjected to turbulent wind by Pospíšil, S.
Limit response of masonry plate structure under explosion effect by Makovička, D.
Local resistance of surface mounted obstacles by Chára, Z.
Longitudinal dynamics of race cars by Porteš, P.
Making use of ball elements in multi-direction undercarriages of mobile robot by Lacko, B.
Management of hydratation heat evolution by Valenta, R.
Material characteristics of the biological materials like input values to the 3D FEM model of the physiological hip joint by Štekl, M.
Mathematical model of the truck shoe brake by Drobný, V.
Mathematical modeling via delay differential equations by Kundrát, P.
Mechanical properties of total knee replacement by Budinszky, Cs.
Mechatronics application influence and its estimation in military vehicles by Vališ, D.
Mobile robot path planning by means of case-based reasoning and rapidly-exploring random trees by Krček, P.
Model of concrete at the early ages by Frantová, M.
Model of hydraulic damper with both air and oil vapour caves by Svoboda, R.
Model of total knee replacement by Křen, J.
Modeling of vocal folds function using FEM II by Hrůza, V.
Modelling and dynamical analysis of gear drives vibration considering the influence of nonlinear couplings by Byrtus, M.
Modelling of WWER 1000 type reactor vibration by means of decomposition method by Zeman, V.
Modelling of the rate-dependent behaviour of filled rubbers by Marvalová, B.
Modification of dynamic properties of circular plate using constraining layers by Naď, M.
Monolens system for bubble dimension and position measurement by Hošek, J.
Multi-lever flow branching by Tesař, V.
Multibody analysis of the control assembly drop in the VVER 440/213 nuclear reactor by Hajžman, M.
New approach of electric machine winding water cooling by Vlach, R.
Non-destructive inspection of a historical wooden structure damaged by fire by Frankl, J.
Non-linear analysis of reinforced concrete frame structures and assignment its response to seismic load by Pohl, K.
Numerical analysis of a surface crack in protective layers by Šestáková, L.
Numerical analysis of interaction of a moving body and streaming medium with high Re number by Král, R.
Numerical modeling of quarry-masonry with application to the Charles Bridge by Sýkora, J.
Oblique inclined surface voids of thick-walled concrete structures of nuclear power plants --- numerical simulation of impact-echo diagnostic method. by Morávka, Š.
On applications of generalized functions to calculations of beam design elements by Sobotka, J.
Optical measurement of surface displacements in the vicinity of crack tip by Valach, J.
Optical set-up for small volume of liquid surface tension measurement by Hošek, J.
Optimal modal properties of milling spindles by Bach, P.
Optimalization of current tabs lay -- out of electrodes in a cylindrical type VRLA cells by Bača, P.
Optimization procedure for sailplane wing sections by Popelka, L.
Orientation of stress tensors in transformed matters by Malášek, J.
PLC - Power line communication by Orság, Z.
Parallelization of fuzzy problems by Kruis, J.
Performance assessment of concrete bridge deck applying SBRA approach and fem model with regard to chloride ingress by Konečný, P.
Pollutant diffusion in the idealized build-up area by Šeděnková, H.
Position control of robot under endpoint constraints by Záda, V.
Possibilities of improvement accuracy of the attitude sensor for walking robot by Houška, P.
Post-impact compressive load carrying capacity of fibre-metal laminate plates by Obdržálek, V.
Potential of adaptive state control for actuator regulation of machine tool motion axis by Hornych, T.
Power grip of hand by Čulík, J.
Prediction and verification of the lifetime for the various combined tensile and torsion load by Hrubý, Z.
Prediction models for fatigue damage accumulation by Brož, P.
Prediction of thermally induced preload in high-speed bearing systems by Holkup, T.
Probabilistic assessment of the fatigue life of tubular steel supports of Žďákov bridge by Marek, P.
Probabilistic evaluation of unstable crack propagation in pipeline using SBRA method by Václavek, L.
Proposal calculations of a new machine for fatigue testing of railway axles by Frydrýšek, K.
Re-calibration of the methodology determining burst pressure of pipe with surface defect by Španiel, M.
Regulation of vibrating roller parameters in process of compacting cohesive and noncohesive soils by Kašpárek, J.
Research reactor IRT-2000 in Sofia reconstruction- design and seismic computation by Markov, P.
Rheologic model of mechanical properties of polyurethane foam by Cirkl, D.
Self-excited oscillation of the thin-walled elastic tubes by Chlup, H.
Selflearning controller of active magnetic bearing by Turek, M.
Shape sensitivity analysis for flow optimization in closed channels by Rohan, E.
Similarity of shallow foundations according to ČSN 73 1001 by Koudelka, P.
Simulation model of car wheel suspension by Pražák, F.
Simulation of autogenous shrinkage of young cement pastes by Šmilauer, V.
Simulation of freezing of rock during tunneling by Procházka, P.P.
Simulation of the current distribution through the electrode system in a cylindrical type VRLA cells by Křivák, P.
Simultaneous radiographic observation of damaging and optical measurement of 3D surface displacement evolution in loaded specimen by Vavřík, D.
Small autonomous robot for practical verifying of artificial intelligence methods by Marada, T.
Software development for simulation of general fatigue crack propagation. Pitting prediction application. by Jurenka, J.
Solution of temperature and stress fields for combustor flame tube by Veselý, S.
Solution of the beams on elastic foundation (deterministic and probabilistic approach) by Frydrýšek, K.
Stability assessment of steel frames using SBRA method by Křivý, V.
Strain gage used for stress and strain state of the torsion test quantification by Fuxa, J.
Strain measurement on the main circulating pump pipeline system TF41 during running up of the nuclear power plant Dukovany, unit IV by Vincour, D.
Stress -- strain analysis of an aging motion segment of the ligamentous spine under physiologic compression by Hudeček, D.
Stress distribution in human artery based on several types of SEDF by Horný, L.
Stress field analysis near the semi-infinite crack tip terminating perpendicular to the interface between two orthotropic materials by Profant, T.
Stress rate and incremental principle of virtual work in finite deformations by Fiala, Z.
Symmetry group analysis of suddenly accelerated flow past a flat plate by Tesař, V.
Technological problems prediction of glass forming in pre-manufacture stage by Matoušek, I.
Testing of frequencies generated in water by submerged high-energy liquid jet by Hlaváč, L. M.
The analysis of rolling forces and moments at weldless tube rolling by Macura, P.
The application of interactive computational system (ICS FEM) in engineering by Eisner, I.
The automatic generation of walking policies for a four-legged robot in a non-deterministic space by Ondroušek, V.
The computational modeling of the flying shears drive by Bubák, A.
The dependence of the vibroisolation effect of the system with three degrees of freedom on the description applied dampers by Sivčák, M.
The development of the new type of simple, middle accurate approximations of caloric functions of state of wet steam by Bayer, Z.
The effect of overloading of pipes on their fracture toughness in relation to the strength grade of steel by Šperl, M.
The experimental apparatus for measurement of characteristics of man-operator of special man-machine system by Čech, V.
The experimental investigation of the influence of the flow swirl and the tip clearance jet on aerodynamic characteristics of exhaust hoods by Tajč, L.
The influence of specimen geometry on plasticity induced crack closure by Náhlík, L.
The material model of railway wheel for numerical simulations of cyclic deformation by Pejchal, P.
The multibody simulation of dynamic effects in passenger car trailer by Blekta, J.
The necessary power for the operation of semiactive vibration control systems. by Ballo, I.
The probability method SBRA used in field of stress relaxation by creep by Lenert, J.
The research of vibroisolation at the technical university in Liberec by Šklíba, J.
The residual stress determination by the hole drilling method by means of the influence function by Švaříček, K.
The ropes bear more by Kalousek, Z.
Thermal cycle with extraction of steam for predrying of fuel by Jirouš, F.
Three-dimensional analysis of RC beams by Svoboda, L.
Transient temperature field in the chamber for measurement of surface tension of supercooled liquids by Hrubý, J.
Tuning up parameters of vibration generator by Hadaš, Z.
UHMWPE failure in knee joint components by Franta, L.
Using the residue theorem for computing of dynamic system response at impulse excitation by Souček, P.
Utilization of multibody modelling for design of characteristics of air pressure controlled hydraulic shock absorbers in the SOR intercity bus by Polach, P.
Validation and optimization of ISO container for dynamic load at transport by Sedlák, I.
Viscoelastic behaviour of composites with rubber matrix reinforced by textile cords by Marvalová, B.
Viscoelasticity and growth theory by Rosenberg, J.
Whirl flutter analysis of the commuter aircraft aeroelastic model wing -- engine component by Čečrdle, J.
Wing airfoil rime ice accretion prediction by Horák, V.
ŽĎAS, a. s. Company in Czech and world industry by Zavadil, R.




Record appears in:
ITAM Library > Proceedings



 Record created 2014-11-12, last modified 2014-11-18
Similar records


Front matter:
Download fulltextPDF Download fulltextPDF (PDFA)
Rate this document:

Rate this document:
1
2
3
4
5
 
(Not yet reviewed)
The Institute of Theoretical and Applied Mechanics :: Search :: Submit :: Personalize :: Help
Powered by Invenio v1.1.3.1022-d8f569
Maintained by fischerc@itam.cas.cz